When sending a recorded message, WL is not releasing the PTT. If I tap the footswitch, it releases. Any ideas? 73, Ken, K6LA / VY2TT _______________________________________________ WriteLog mailing l
One more note on my PTT not releasing. It is definitely somewhere in the computer to W5XD Multi-Keyer interface. If I pull the PTT from the Multi-Keyer, it works fine. 73, Ken, K6LA / VY2TT _________
When I click on Packet Window, a window opens that says "DXTelnet <> Writelog Spot Linker" Do I need to start DXTelnet before I start WL for this to work or does WL have a DXTelnet program in the bac
There are 3 boxes for each county in the FQP mult window. I am guessing the extra is "a bug." Am I missing something? 73, Ken, K6LA / VY2TT _______________________________________________ WriteLog ma
One last feature that would complement the new Full Callsign .wav feature would be to search for 2 & 3 letter .wav combinations i.e., W6, AA6, etc. That way, if a full callsign isn't recorded, there
Whoops. RTFM to me. Wayne, W5XD, politely pointed out to me that the help file does indeed indicate WL will look for .wav files shorter than the full callsign. "If you create WAV files named with let
How does WL deal with the IC-7800 SO2R in a box? There is only one C-IV output, one mic jack and one key jack, not to mention only one relay for the amp. Is this really SO2R in one box? 73, Ken, K6LA
I'm having a very strange problem. Any and all recorded messages, i.e., F1.WAV, etc, will play but then most (90%) of the time will not release the PTT. It doesn't make a difference if the transmit a
I tried Don & Scot's suggestions to no avail. This problem exists whether or not the transceivers (Kenwood TS-950SDXs) are in VOX or manual. I've tried every possible combination of PTT in Setup/Port
I swapped out the cable from the computer to the W5XD Multi-keyer. No change so its not in the cable. 73, Ken, K6LA / VY2TT _______________________________________________ WriteLog mailing list Write
I swapped com ports to no avail so it is not a serial port problem. If I pull the PTT from the W5XD box, the xcvr drops back to receive, so it is not on the radio side. 73, Ken, K6LA / VY2TT ________
I found a less than ideal fix, but a fix nonetheless - if I remove the PTT lines, the recorded messages work fine both with and without VOX. Of course, live mic audio will only work with VOX using th
Per Wayne, W5XD's suggestion, removing the cables from the PTT outputs on the W5XD keyer to the XCVRs solved the problem with recorded messages not dropping the PTT after the message was finished, at
I wanted to log shorter off-times manually in WL for CQP. The help file says: To manually enter off time for a contest, you don't use this dialog box. Just scroll to the QSO where you want to show a
When I bring up the Sound Board Mixer Control program, the box for Msg Play Level is greyed out and can't be adjusted. I'm told my recorded messages are slightly distorted and I want to reduce the le
Is there any way to get a count of the number of stations worked in each multiplier in CQP? 73, Ken, K6LA / VY2TT _______________________________________________ WriteLog mailing list WriteLog@contes
Our Mult radio was off 2 hours for the 1st 7 hours of the contest. I select "View" "By PC on Network" and then select the mult radio and highlight the 1st 7 hours of QSOs. I apply the time change to
For me, "tools/preset exchange from ADI file," with data from last year's log, is plenty good enough. Dave Hachadorian, K6LL Yuma, AZ I agree with Dave. And, as an extra bonus feature, you can use yo
About a year ago there was a thread that the RIT couldn't be cleared using WL in the Icom PRO II. Was there ever a fix for that? Is it different in the PRO III? 73, Ken, K6LA / VY2TT ________________
I've been looking at various functions available under "Tools Keyboard-shortcuts." Look at the drop down menu at the bottom next to "Command to Run." It is a treasure trove of potential keystroke and