Gordon Contact Wayne W5XD. https://github.com/w5xd/RC1101 The above is a link to the project that works with writelog software and has a knob and lots of buttons. Jay WS7I On 4/16/2020 6:39 AM, Gordo
Well once you get the audio on the control site then I setup a local session of a rtty program MMTTY would work so you can see a waterfall, bunch of different programs would work. Get the RC1101 it j
Re-run Writelog Sound Boarrd Mixer control would be my guess. On 7/16/2020 7:42 AM, Ernest Abel wrote: After a disastrous computer crash right in the middle of the IARU contest all my settings were r
Wayne W5XD is aware of this and the link doesn't work on the country files website for some reason. Jay WS7I Sent from AT&T Yahoo Mail for iPhone Yesterday this worked OK. This morning I started up W
The answer is no, but why would you want to run a signalink on an Icom 7410. 7410 has a built-in Soundcard which is far superior to the signalink and is easy enough to setup. What is not working? I
Well you missed most of the key stuff that would need to be examined. What OS on control and remote computers. I find that controlling volume on remotes is fairly interesting to say the least. I d
Must be as it works fine with all my ICOM's like IC-7410. On 10/2/2021 5:22 PM, Greg5ta via WriteLog wrote: All Writelog is not seeing/connecting to the Audio Codec in the IC-7300. All other fun
Jerry All of your writelog entries are in it. However, it would be much easier just to spend the $35 and get a current Version 12. Can't recall if 11 used the registry but probably so. Here is a sma
When you first go into Writelog on the right hand side you can EXPORT the INI file. Two things. 1. The USB Cable must be very short -- this is an Icom problem. 2. In the [RIGS] section Com3:=19200,n,
Rig type? OS ? Most likely you need to run Sound Board Mixer control. Microsoft updates tend to mess up Sound settings. The other thing is most likely RF getting into it. On 12/9/2022 9:45 PM, Greg
set/nocw gets rid of CW. All of these are on skimmers. Feel free to use my cluster ws7i.ewarg.org 7300 is the port. Running VE7CC. Jay WS7I use this command set/noft8 set/noft4 that will will get ri
As in all things Writelog. In HELP. Type in cluster in the search box. Under Single Operator it tells you. I suspect that works. If you telnet to a VE7CC cluster the command UNSET/DX turns off all
To find the writelogl.ini file when you open up WL click on export and it will save the writelog.ini file. You can then edit it and re-import using the inport function on the same menu. Keith was ri
It is where you export it to be. When you first open Writelog there is a menu on the right hand side before you click on a file. See the help. Export it, edit it, inport it. Then you can have it ho
Jim Run the program Writelog Edit Sub-bands. You will see CW 28000 to 29700 as CW is authorized in that entire Range of course. Change it to what you want. Or far easier just change your Cluster to
Make sure that you have web updated the data files. SCP, and Country files. In File >> Updarte. Jay WS7I <a Good Morning All Is the problem only at my end?? I have the newest Ver.