Hi all, I am trying to configure RTTY on WL 12.68H together with Flex 6400 (v3.3.33) on a Windows 10 pc. FlexRadio 12.61b driver is installed and WL is properly configured. MMTTY and 2Tones instances
I have a handful of suggestions. 1) look at he slice, DSP tab - check the RTTY tones for the slice, match the tones in MMTTY 2) check the DAX control panel and make sure the RX Button is on for the D
Hi Kevin, thanks for the suggestion, all is set accordingly If i run MMTTY alone it works well, RX and TX, no problema t all. The issue is present only when opening MMTTY and/or 2Tones from Writelog
You say "WL is properly configured." Did you set the RX soundboard in the WL Soundboard mixer control? Don AA5AU Hi all, I am trying to configure RTTY on WL 12.68H together with Flex 6400 (v3.3.33) o
Hi Don, yes, that's done. As a matter of fact if I shut down the RTTY window(s) and open the CW window it shows the same white noise but, if teh CW signal is strong and clear, does some decode. .. Al
Author: Robert Hess via WriteLog <writelog@contesting.com>
Date: Fri, 20 Jan 2023 22:38:28 +0000 (UTC)
Hi Alessandro, I had the same problem, and I've got to thank Steve, W1SRD, for the fix. Here's what I did: 1 - Be sure to use the latest Flex/Writelog native driver 2 - Once you have Writelog booted
Hi Bob, thanks for the crystal clear procedure to set up the application. Now WL works well both in RTTY and in CW. The issue originated in (9) where I had: Slice A > to DAX Audio RX1. It would be gr