Hi guys, the version of 2Tone and MMTTY that is used within Writelog has stopped xmiting any Tones. I am using a Flex-6300 and have to use lowtones AFSK. Both 2Tone and MTTY copy OK but nothing on tr
Look carefully at Config in each program to verify that it is set for low tones and for the correct channel of the correct sound card. Also, look at the sound card mixer for Playback. N1MM, both Clas
Thanks for the tips guys, MMTTY plugin inside of Writelog works fine. Yes DAX is on. Keith how are you using 2125/2295 with the 6500?? I can't use the filters if I used the hightones. I will look at
I think the key to this might be "when I uninstalled N1MM+". Perhaps when you uninstalled N1MM+ then you lost file XMMT.ocx since N1MM includes this file and I believe it gets registered when N1MM is
Thanks guys and to Keith for that tip on moving the filter. What I did for rtty was to set mmtty for lowtones, 1445 and put net ON so that MMTTY would send and Receive on the same frequency. I am usi
Don is undoubtedly correct. If N1MM Logger was installed before the XMMT plug-in for WriteLog, uninstalling N1MM Logger will remove and unregister XMMT.ocx. If that is the case, you will need to get
I use 915 Hz because it's easier for my ear to tune it in. 73, Jim K9YC _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailm
I had a similar problem after re-installing WL on a new hard drive before ARRL RU. I will describe my problem. Maybe yours is similar. I can't use XMMT.ocx for MMTTY, because I have a large PTT to au
Thank you Chad for you suggestion. I tried what you said, but 2Tone had the correct setting for the Flex-6300 soundcard DAX. But it was worth a try but didn't help. I think that maybe I will delete a