Mail Archive Search: <+from:lists@subich.com>

Results:

References: [ +from:lists@subich.com: 27 ]

Total 27 documents matching your query.

1. Re: [Yaesu] FT1000MP MkV digital modes vox (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sat, 17 Jan 2009 16:54:31 -0500; No, VOX is not available on the Packet input in the FT-1000 series of transceivers. 73, ... Joe, W4TV _______________________________________________ Yaesu mailing list Yaesu@contesting.com http://l; /archives//html/Yaesu/2009-01/msg00006.html (8,407 bytes)
2. Re: [Yaesu] FT1000MP MKV FIELD & USB (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Mon, 7 Sep 2009 15:11:32 -0400; Paul, That's a problem with the driver ... check the manufacturer's (or the chip vendor's) web site for updated Vista 64 drivers. The issue is that the old drivers were not being identified properly; /archives//html/Yaesu/2009-09/msg00010.html (9,609 bytes)
3. Re: [Yaesu] 1000MP audio/mike feedback - CAT pulse noise (K1TTT) (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Fri, 30 Oct 2009 21:30:30 -0400; Scott, Since the pulsing is in time with the "CAT" light, this is probably an open ground or shield in your mic or CAT circuit. Since it does not occur in PKT, my guess would be an open ground in the; /archives//html/Yaesu/2009-10/msg00021.html (11,577 bytes)
4. Re: [Yaesu] Yaesu serial numbers (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sun, 1 Nov 2009 20:57:44 -0500; Ken, The earlier series of units will have relatively low serial number suffixes - typically less than 20,000 so that the digit following the letter which indicates the month of manufacture will be a; /archives//html/Yaesu/2009-11/msg00004.html (10,255 bytes)
5. Re: [Yaesu] FT-1000Mp Mrk V Key Factory Click Mod? (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sun, 13 Dec 2009 17:13:37 -0500; "mid-2004" would equate to a serial number starting 4Hxxxxxx. Yaesu uses the same format for serial numbers in all of their transceivers. 73, ... Joe, W4TV __________________________________________; /archives//html/Yaesu/2009-12/msg00003.html (12,032 bytes)
6. Re: [Yaesu] Yaesu FT1000MP Noise Blanker and Intermod (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Wed, 23 Feb 2011 17:39:10 -0500; No. That's the nature of the analog IF noise blankers. The strong off frequency signals modulate the noise and when you set the threshold very close to the signal level in order to blank the line no; /archives//html/Yaesu/2011-02/msg00008.html (9,310 bytes)
7. Re: [Yaesu] FT1000MP and RTTY (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sun, 17 Apr 2011 13:57:59 -0400; Are you using FSK (RTTY) or AFSK (PKT) with the FT-1000MP? In RTTY the FT-1000MP (and Mark V) can display either carrier or Mark depending on the setting of Menu 6-3 (RTTY Frequency Display). In PKT; /archives//html/Yaesu/2011-04/msg00009.html (9,878 bytes)
8. Re: [Yaesu] FT1000D (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sat, 02 Jul 2011 22:45:15 -0400; FT-1000D is relatively easy to replace. Fuse is in a holder and easy to access ... not soldered in and buried as in some of the newer rigs. Uses a standard "meter" or instrumentation fuse ... 73, ..; /archives//html/Yaesu/2011-07/msg00001.html (7,558 bytes)
9. Re: [Yaesu] Band Data connector splitter for 1KMP (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Thu, 16 Feb 2012 14:24:03 -0500; Ted, I've never heard of a commercial splitter for the Band Data - Yaesu provides a "loop through" connection in the FTV-1000 transverter so it's possible to connect both the MK V and Quadra at the s; /archives//html/Yaesu/2012-02/msg00004.html (8,860 bytes)
10. Re: [Yaesu] Band Data connector splitter for 1KMP (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Thu, 16 Feb 2012 16:16:03 -0500; John, Try adding diodes in series with each of the BCD lines from your Band Decoder and the 1K-FA. The problem is that when you tun off the 1K-FA the pull-up voltage in the 1K-FA goes away and the 1K; /archives//html/Yaesu/2012-02/msg00008.html (9,709 bytes)
11. Re: [Yaesu] FT1000D on RTTY (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Wed, 14 Mar 2012 11:58:45 -0400; Yes, that's what the RTTY mode is. 73, ... Joe, W4TV _______________________________________________ Yaesu mailing list Yaesu@contesting.com http://lists.contesting.com/mailman/listinfo/yaesu; /archives//html/Yaesu/2012-03/msg00006.html (7,081 bytes)
12. Re: [Yaesu] FT 950 & band decoder (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Wed, 21 Mar 2012 21:34:35 -0400; Not well enough ... look at the "Linear" connector. It has the same signals as the old "Band Data" port in the FT-1000D/MP/MKV/etc. plus Tx REQ (PTT) and ALC. 73, ... Joe, W4TV _____________________; /archives//html/Yaesu/2012-03/msg00009.html (7,302 bytes)
13. Re: [Yaesu] FIF 232-C (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Thu, 07 Mar 2013 20:07:44 -0500; Whatever you find will need to be inverted TTL. What kind of "cable" are you looking for - serial on the computer end or USB? Do you want just a cable or do you want other functions in an interface?; /archives//html/Yaesu/2013-03/msg00003.html (6,907 bytes)
14. Re: [Yaesu] Signalink USB interface to FT-1000D (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Fri, 12 Apr 2013 09:20:25 -0400; Use the PACKET connector and operate AFSK in PACKET mode - note PACKET is LSB in the FT-1000D and FT-1000MP so modes like JT9/65, MFSK#, etc. are not supported (PSK31 works in either USB or LSB). Alt; /archives//html/Yaesu/2013-04/msg00005.html (7,546 bytes)
15. Re: [Yaesu] FT-2000D (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sun, 23 Jun 2013 14:56:15 -0400; You could set menu 144 tGEn MA PWR to 50 or 100W. I would still check the power output using a scope or very good peak reading wattmeter like the LP-100A using a single "dit" every 2 to 3 second whil; /archives//html/Yaesu/2013-06/msg00011.html (7,756 bytes)
16. Re: [Yaesu] FT890 strange behavior (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Wed, 10 Jul 2013 23:55:49 -0400; Sounds like common mode RF on the feedline is triggering the overvoltage protect (crowbar) in the power supply. Were you on a different frequency/band than normal? 73, ... Joe, W4TV On 7/10/2013 11:3; /archives//html/Yaesu/2013-07/msg00001.html (8,316 bytes)
17. Re: [Yaesu] FT890 strange behavior (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Thu, 11 Jul 2013 16:18:24 -0400; Mike, the problem is definitely RF getting into the PS. It comes and goes depending on (1)where the PS is located relative to the radio and (2)which band I am operating on. This is a textbook descrip; /archives//html/Yaesu/2013-07/msg00008.html (11,084 bytes)
18. Re: [Yaesu] FT-2000D with Quada (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Thu, 11 Jul 2013 22:00:31 -0400; The spike problem is in the FT-2000D not the amplifiers. The Quadra may not be effected as much by the spike - particularly if you turn on the attenuator as recommended in the Instruction Manual - bu; /archives//html/Yaesu/2013-07/msg00011.html (7,612 bytes)
19. Re: [Yaesu] FT-1000D on MARS freq use help please (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Wed, 09 Apr 2014 00:03:15 -0400; Your MARS chain of command should have that information. If they don't, check places like MODS.DK or RADIOMODS.CO.NZ. "MARS MOD FT-1000D" on Google turned up at least a half-dozen sources of informat; /archives//html/Yaesu/2014-04/msg00001.html (7,560 bytes)
20. Re: [Yaesu] Fwd: RTTY issue (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Fri, 27 Feb 2015 08:52:14 -0500; Turn up the TX Audio level on your sound card and the mic Gain on the FT-1000MP to get the necessary transmit output. Note: PKT is LSB configure MMTTY for "Sound" in the TXPort on the MISC tab. 73, .; /archives//html/Yaesu/2015-02/msg00002.html (7,680 bytes)

Current List: 1 - 20
Page: [1] [2]