Hello TT'ers, In anticipation of having to replace the U-bolts on the Rohn AS25G rotator plate currently on the tower, what are the U-bolt dimensions (i.e., distance between legs, overall length and
Hello TT'ers, I am getting ready to change out my Ham IV (circa 1979) with an AlphaSpid due to changes in my tower setup (stacked beams). The unit was overhauled about 2 years ago by CATS (aka "Rotor
Hello TT'ers, I'm installing a WARC-band yagi and have everything just about finished except I'm wondering what (if anything) to do about sealing the connection between the coax balun (tinned copper
Hello TT'ers, I was very interested in Tony's (N2TK) experience using ScotchCote and Scotch 33 tape to seal the black plastic trap caps on an A3S. I just finished refurbing my trusty 15 year old A4S
Hello TT'ers, Here is another source for a large selection of SS hardware. No affiliation...just a satisfied customer. 73 / Stokley, W3SB http://bosunsupplies.com/ + _________________________________
Hello TT'ers, At the urging of Bill (K4CIA) I dug a little into the TT archives (something I should have done the first time!) using keywords "tape trap" and found the following... "As a result of th
The only other thing I would add to the previous posts is that "more IS NOT better" when using these products. If too much of the anti-oxidant is applied, it will cake and form a non-conducting layer