I am about to order a few airpax breakers (one to use with my Triton 540 and a Ten Tec 963 power supply). The salesman at POCO has been very responsive, and indicates that they sell lots of the same
I am certain you will enjoy your Orion, I use ver.1.732 as I like the way it operates.. good luck and have fun tom N6AJR In a message dated 4/19/2006 9:05:36 A.M. Pacific Daylight Time, pa5mw@home.nl
That's for sure. It's a pain, too, because you either lose the efficacy of the other plugs, or you have to build your own cable. One of those things from TT that make you scratch yer haid and go, "hu
Ten-Teckies, These will be able to follow your Orion and Orion 2 so therefore it is applicable to the T-T reflector, isn't it? Also since T-T no longer produces a solid state amp, I thought you might
You can load in a previous version of the software, I did it on my O 1 I prefer 1.372 so after it tried the ver 2 I went back to the old one. just a master reset, reload, and all the older versions a
Come on folks on side band you are supposed to sound like Donald Duck.. tom N6AJR In a message dated 4/29/2006 8:22:31 A.M. Pacific Daylight Time, toby423@earthlink.net writes: Speech Processor......
I find if you look at the rest of the statement I indicated I have an O 1 and prefer the 1.372, and of course it won't work on the O II, I never said it would,. But I do like my original Orion, bette
I guess I am not up to par on the Orion mystique. I turn on my Orion ( original style) using 1.372 and in a contest I just push buttons and twist knobs till it works best for me. I do have some semi
try running a substantial ground strap from the rig to the powersupply, something in a braid would be best. My Orion was having "screen fade" on voice peaks and the ground helped with the voltage dro
Here is an idea, move to california, where we get lightning maybe 3 times a year, I would prefer an earth quake to a lightning strike, and re,member if you don't have flood insurance, a short can alw
blame it all on Florida, they are the ones who made the final decision, remember poor old hung chad, and then fact that his brother JEB bush is governor of Florida has nothing to do with it...:) In a
Since I have no empirical experience with either, and I am not enamored with a clolor display, can someone share his or her experience with bot rigs before I buy a new Orinon II? You can do if off or
Jack I've had problems with usb to serial adapters, If you can the better option is to put a 1 or 2 port serial port card in computer, about $25 from Tiger electronics I think Ira I have done this an
The FT1000MP is known to have a finicky CAT port, but some other brands of USB to Serial port adapters have been shown to work with it. I sent one of the KeySpan adapters to the deveoloper of some TC
I use AC Log ( n3fjp.com) for my logger, which will do computer control with the Orion, and the steppir and the alpha 87 so it is point and shoot for contesting and DX.. ( $39 for everything , down l
I had the same problem and had to run a 1/2 inch wide braided ground strap from the power supply ( 50 amp astron) to the ground lug on the orion, fixed it in a flash I guess the screen is very sensit
Folks, I use a Scout mobile at half power with very good results. Still have some noise though no matter what filtering I use. The Explorer is fairly quiet though, but not perfectly quiet. My questio
I have an original Orion, and I love it. It has the best receiver of any of my rigs and I have 10 hf rigs total, and have owned a bunch more. my current list includes a ts 2000 and a 746 pro and an 8
Let's step into my time machine and go back to 1997: http://web.archive.org/web/19980221023712/www.tentec.com/pricelis.htm We see a new Scout listed for $549. The modules were $29 each. power supply
My questions to the list are: do I use a standard modem cable to connect to my computer or do I need a null version? Also...I was thinking of getting the roofing filter (600 hz) from Inrad. What is t