I found this on the Internet--Airpax breakers for $1.50! I wonder if it's a misprint. Check item #G. http://www.solarseller.com/dc_circuit_breaker_breakers_rated_up_to_80_volts.ht m Ron N6AHA -- Orig
Why is it these discussions always manage to come down to some smart remark about young (and bright, smart, and eager, and not afraid) versus old (stodgy, stupid, fearful, and still waiting for Elvis
I'm not sure how many hams want a no-tune amp--tuning a tube plate to low Z doesn't really bother me that much, in fact I prefer to do it myself, not trusting some logic circuit to tune and load for
I need some advice on something that is pretty basic. I have a new Orion, but find the dust buildup on the outside of the black case really shows up. How do you handle the dust buildup on your Orion
Reading this reflector, those are the questions that comes to my mind. I am studying to become a ham, working with a friend of mine who is a Ham, which has an Orion and an Orion 2, and it seems that
I was using 1.372 for quite a while but am now using 2.056 with no problems. I did have to reset several parameters, ( tx eq, mic gain, sp on sb and several others, but I do like it now. it works.. I
In reference to the ALC thing, I quite using an ALC line a bunch of years ago when an old Tube rig ( ft 101ee I think) was running into a Tube amp ( I think a Clipperton L) and the alc would cause th
Together with my excellent O2 I purchased an excellent Ten Tec 708A unidirectional microphone which an informal test shows as indeed being a cardioid or 'uni-directional' microphone. The Ten Tec webs
Well I managed to have the little bitty screw that holds the Knob for the sub rx disappear, I think It left for the summer and the knob was acting weird. It certainly not on the floor , where I didn'
I use 7 0r 9 inch minimus or RCA speakers, in the heavy aluminum case, sold by rat shack for a while. small, and good freq response for these old and damaged ears.. tom N6AJR == In a message dated 7/
Mine arrived yesterday, but I have questions. I understand the Line & Load, but my AIRPAX units have what looks like some kind of a sensor circuit. There are three small connectors between the Line &
First thing I recommend id to run a good ground braid from the powersupply to the radio. I have solved several weird problems with this.. good luck tom N6AJR == In a message dated 7/22/2006 11:44:52
Wouldn't it be nice to have several stable software versions to choose from? Fix the instability problems in ver 1.371 without changing the NR for instance. Just like one could choose to use Word or
I remember my first "real computer, a Rat Shack model 1 level one with 4 k of memory. had to program in hex..then I got a model 1 level 3 with 16 k of memory, wow what a computer... then I bought a c
there are probably somewhere around 3500 to 4000 Orions out there, and many thousands of other Ten Tec rigs out there that have been produced in the last 30 years. This is the Ten Tec reflector, not
I have a scout and all of the modules and it works well for what it is. it does a yeoman's job as a usable radio. If I was only taking one rig, I would consider a FT 857d with an atas antenna as an a
Well folks, this may actually be the start of a new revolution in ham radio. according to the info on site you can literally plug this into a router at you cabin on the peak of the mountain at 7000 f
a how about CPM _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Mine is just an old beater with only 1 of the 3 "extra" filters installed , I use it generally for listening to nets and as a backup to the Orion. I do have a ext vfo for it and run it on a TT power
Why is it when someone decides to leave the list because of complaining, whining, nit-picking, SHOUTING, and bloated posts, they inevitably do it by SHOUTING a long complaining, whining, nit-picking