Hi ALL, Dave hits the key points right on. To add, you can direct bury any standard version of LMR. If you are concerned that a pick ax, back hoe, etc. might cut the jacket, get the "DB" version, dir
Hi Stokely, there are several RG8 similars (size, electrical spec and attenuation) which utilize a proper density of Polyethylene which qualifies for direct burial. There is also one step up from tha
We can provide various "after market" good quality low priced connectors for ATV and other hard line. Also we can provide LMR, Heliax and RF Systems Cable Wave (latter 3 more expensive but we discoun
Hi Rich, we can provide quality hard line connectors for various cables at quite low pricing vs. those supplied by Andews and Times for Heliax and LMR (we also distribute those lines too). I will con
Hi, trying to find good ref. source for dielectric and strength rating for medium to heavy duty materials such as Sched 40 PVC, Delrin, etc. Thanks, Steve, K1PEK DAVIS RF Co. -- FAQ on WWW: http://ww
Hi, we carrry a full line of connectors. Give me all dimensions you can (OD, conductor , alum wall size, any markings on cable, etc.), I'll see what I can do. Regards, Steve Davis, K1PEK DAVIS RF Co.
<< Well, 5pm EDT came and no phone call. But much to my surprise, I did get a call later. I said, "I thought you people go home at 5." He replied, "Not always." 73, Aloha Ted Leaf, K6HI Kona, Hawaii
Hi Riki, My learned friend Steve, K7LXC, is right on the money with the 5 " bend radius. I was waiting for the spec on this to give you attenuation as the master catalog doesn't have this part #. How
<< Another vote for using UV-resistant coax and rotor cable! >> Tom, you're absolutely right. My 38 years as a ham and many years in the business of wire, cable, and rope supplied to variegated indus
<K4LDR, Pete: I took a 4th lightning hit this evening (Sun); all since June 29th. PolyPhaser has a comprehensive lightning protection techniques publication. $22 I believe now. I have it. We have a U
<< << I recently bought some 3/8 inch braided dacron rope to use with a gin pole. I'd like to receive some suggestions on the best way to seal the rope ends, something better than the black electrica
Hi Paul, There are crimp BNC's for 8X and the differences in the various sizes of RG59, from the standpoint of dielectric O.D. as well as overall O.D. vary such that it is not appropriate to use an R
Hi Rich, Jim Miller's (Comtek) phone number is 704 542 4808 (fax is 542 9652), Email: K4SQR@juno.com. If you haven't experienced him yet, he does a great job in 4 square phasing and related. Cheers,
Hi, Have a need to source 300 ohm, 4 kW, non inductive terminating resistors for HF. Have Surplus Sales Neb. as one, would appreciate any info on other commercial sources. Thanks a lot, Steve Davis,
haveany experience using these things? Are they effective >keeping the birds off the hardware? >> Hi Matt, One industry we serve is the marine electronics market. Just about all of the full coverage
<< 33+ also is very brittle in cold wx when Super 88 is just as limp as when indoors. >> 33+ combined with Viagra works fine in winter (sorry Steve, I couldn't resist). Steve Davis K1PEK DAVIS RF Co.
I have recently worked out a revised, discounted (as before) price structure that has been affected by PolyPhaser's 1998 price changes (increases). My firm discounts 12% off list and just want to be
<I took a major lightning strike that blew out almost everything I had related to amateur radio, in addition to all of the computers, some household items, etc. I'm slowly getting back on my feet aft