Help! I'm looking for a manual for a TH5DX, NOT the TH5/MKII (aka TH5MM) that Hygain has posted on their site. The antenna dates back to the early 80's. I've gotten one that has been in storage for a
Many thanks to all who responded, and especially to KA6IOB, who faxed me a copy today. 73 de N8AU, Jim in Raymore, MO _______________________________________________ See: http://www.mscomputer.com fo
Congrats on the new QTH. Bob, I've got a tilt-over tower at my QTH that is much smaller than what you are proposing. I have great misgivings about attaching the winch to your roof. 1700 lbs. is a LOT
Tom, The manual for the A3S shows the size for the U-bolts holding the boom to the mounting plate as 1 5/8"(4.1 cm) in size. The U-bolts that hold the mounting plate to the mast should be 2 1/8" X 3"
I painted my 48' Rohn 25G, primarily because it was old and some of the galvanizing had worn off, allowing part of it to get some surface rust. After sanding off the rust, I had to paint it to protec
Lee, Metal By the Foot, here in the KC area has a good selection http://www.metalbythefoot.com/ 73 de N8AU, Jim in Raymore, MO I am interested in building some antennas and I wonder if there is a mai
Aren't imaginary numbers the ones that the XYL puts on her driver's license for her age and weight? 73 de N8AU, Jim in Raymore, MO <SNIP> I've never understood imaginary numbers. <SNIP> Lee - K0WA __
Is your dog's name Spike or Sparky? 73 de N8AU, Jim in Raymore, MO i have a 160ft of 3/16 coated cable that goes from the tower to the backdoor of the garage... i am wondering if i should bond it to
This tower looks like a BX tower. Depending on the height, it should handle any moderate sized beam, like an A3 or A4 with ease. It looks a bit rusted so you'll have to determine the extent of the co
Finally one I can sink my teeth into!!!! My experience isn't with a tower, though. Almost a year ago (on July 16th) a huge storm blasted through the KC area... 80 MPH + winds, tornados, lightning, th
After the last two presidential elections, I don't think that ANYONE would miss Florida! 73 de N8AU, Jim in Raymore, MO Date: Thu, 14 Jul 2005 20:42:05 -0400 From: "Julio Peralta" <jperalta@tampabay.
Andy, Cushcraft lists the 30 and 40 meter add-ons as the A743 and A744 respectively. Here's the link to the manual: http://www.cushcraft.com/support/pdf/A743_451.pdf. Other manuals are available at:
I've had several inquiries about the parts I have available. Last winter, the boom for my A3 broke under the weight of 1/2 inch of ice and the director and driven element crashed to the ground. Only
OK... did some research. I do not have the center insulator for the driven element. I have only the traps available, the ones for the driven element had the 40 meter dipole option installed. I'd like
Wish I had a picture of my wife's car after she was parked under a tree near the local Topsy's Popcorn shop. Blue, red, green, yellow... VERY colorful! I have the same problem with my tower. This mor
Cats are even worse that mice... and they breed faster! 73 de N8AU, Jim in Raymore, MO Message: 5 Date: Wed, 7 Sep 2005 13:36:47 -0500 From: N?ATH <N0ATH@Charter.net> Subject: Re: [TowerTalk] Critter
If there truly were intelligent design, wouldn't the snake be called a multiplier? 73 de N8AU, Jim in Raymore, MO Message: 4 Date: Thu, 8 Sep 2005 10:34:48 -0400 From: "Pat Chiles" <chilesp@adelphia.
Perhaps, but only periodically 73 de N8AU, Jim in Raymore, MO Perhaps he's lying on a log table... 73, geo - n4ua "Wireless with -- -- This message is for the designated recipient only and may contai
Has to be at least 20 WPM (worms per minute) 73 de N8AU, Jim in Raymore, MO --Original Message-- Date: Thu, 8 Sep 2005 13:33:52 -0400 From: "Bill Axelrod" <bill@axelrods.org> Subject: Re: [TowerTalk]
Amen to that. I live in an area where all the utilities are underground, not far from K0DAN. No telephone poles at all. I put up my tower a couple years ago... 48' of Rohn 25G with a TH5, 4 elements