If you're interested in HF and especially MF (160), come see some a few of the ideas that are on the HomebrewTips page. Included is a large picture of the all details of the 160M Shielded Loop (SLOOP
Here are some of the holepunches we use around the 160M antenna farm to make those Beverage boxes, relay boxes Baluns and UNUNs, brackets etc. http://homepages.dstream.net/K0FF/HomebrewTips/Greenlee.
A few days ago we were talking about UNUN Beverage transformers, and I showed a link to a picture of one that I make and use, which has 16 turns of quadrafilar windings. Some comments were made regar
right on Gene, scrap their idea of a coil, and consider using a top wire, as high as it can be, to load the thing. . You'll lose the multi band performance that way though, unless you fix it so that
Nothing new under the sun here, but if you haven't built one of these before, take a look, and you may get some ideas. http://homepages.dstream.net/K0FF/160/160unun Happy Building, Geo>K0FF -- FAQ on
Hello, I'm just putting the finishing touches on a bi-directional Beverage and was wondering if I should run the control wires for the relay under the Beverage wire, or go by another route and bring
Seems like my link to ZJ is dead, and can't find his homepage on the web. Anyone have recent info? Hope the business is still intact. K0FF -- FAQ on WWW: http://www.contesting.com/topband.html Submis
Mine goes to the pin and stays there. You can see the 6 towers of a 5KW station on 1070 from here. I'm interested in building a single band filter too. Anyone got a schematic scanned and can post it?
A very nice summary, Ink, and congrats on the nice installation/ I have tried Fence wire, and it does work AOK, but in this climate (NE MO) it seems to break a lot more than the 18Ga stranded electri
This is a multi-part message in MIME format. --=_NextPart_000_002E_01BF3C27.95E0EC00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit For any who may be FT-1000D owners