The signal out is set by a menu item. I don't have my Orion in front of me but check in the Menu -> RX and see if it is there. k4ia Craig "Buck" Fredericksburg, Virginia USA _________________________
Henrik Many folks have had good CW results by using an INRAD 650hz roofing filter in the 1khz slot. After that the DSP does the rest. Radio k4ia "Buck" Fredericksburg, VA USA ________________________
I found that I had to change a setting on the Orion menu system under CW Jack PTT I think that I had to change it to read none (I am at work and am going on memory). YES! That fixed my problem with t
I don't hear anything on my Orion k4ia Craig "Buck" Fredericksburg, Virginia USA _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/
Sorry guys - When I said I don't hear anything on my Orion, it was in response to the noisy CW relay question and I meant: "I do not hear any CW really clicking." My Orion works just fine it was my c
Since everyone has their gripes and answers, I thought the following summary of airline repair posts and responses might be of interest to the list. Supposedly they are actual repair requests from pi
Jeff I have had both and the Ameritron ATR30. I would rate them in this order: TT, Ameritron then Palstar. The Palstar is a very nicely made unit with better construction than the ATR30. However, if
2003 QST on a newstand there. Radio k4ia "Buck" Fredericksburg, VA USA _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/l
I always liked the elongated dashes. It gave special emphasis and a real personality to the copy. For example dit daaaaaah dit was a real special Roger. This thread is making me think about getting o
The root problem is there is no Novice class license being given anymore. The entry level tech is buying a walkie talkie. He gets bored with it after the novelty wears off but the barrier to General
Our local club usually runs a General class but the last time we did it, everyone passed the theory and in a full year, no one passed the code. This year when someone asked when we would be running t
Interesting in that TT also just broke up with LDG on the tuners for the Orion. Is TT having problems getting along with its partners? k4ia Craig "Buck" Fredericksburg, Virginia USA _________________
of incentive licensing. It was FCC; ARRL did what could be done to make what FCC was going to do anyway as acceptable as possible to the masses. <<<<<<< That is not how I recall it. ARRL got its butt
of incentive licensing. It was FCC; ARRL did what could be done to make what FCC was going to do anyway as acceptable as possible to the masses. <<<<<<< That is not how I recall it. ARRL got its butt
for the new rig.<<<< That's were my vote goes. It is either the Power Supply itself or RF getting into the Power Supply and radiating back through the AC lines to the neighbors. Possible but improbab
mains AC sockets.<<<< Can you move the feedline to get it away from these? Could be RF on the feedline getting radiated. Did the feedline or antenna change? k4ia Craig "Buck" Fredericksburg, Virginia
I poll once a second using DxLab and haven't had the problem for a while. What rates are others using? k4ia Craig "Buck" Fredericksburg, Virginia USA _______________________________________________ T
As I understand - The Threshold controls the level at which the AGC starts to kick in. If you have the Threshold set low(er), the AGC kicks in a lot. If you set the Threshold to a higher number (say
A QSK delay of 0% (MENUS > CW) will produce a clicking noise in headphones. Increase the QSK delay to 10% and the click goes away but the QSK is still so fast you can hear between the letters. k4ia C
Gary I sometimes find it hard to tell if the NR is working or not. Band noise is still there. But I find that if I let the NR "do its thing" the S meter gradually declines and even though I still hea