Yes, it is very different. Try reducing the RF gain or increase the AGC threshold and hang levels. That seems to help but I haven't had time to play with it enough to come up with the answer. k4ia Cr
I am also going back to 1.373b5 for all the reasons you state. 2.060b Gain and AGC are still messed up and the audio is crackly. If you turn the audio up loud enough to hear a weak signal (almost all
Mine went back to the shop for a bad chip on the logic board. It manifested when I downloaded the last version of the software (before the most recent). The radio went nuts and did all sorts of weird
I don't know where all these cost numbers come from. Here is the Order Form. _http://www.elecraft.com/K3/K3%20Order%20form%20rev%204.pdf_ (http://www.elecraft.com/K3/K3%20Order%20form%20rev%204.pdf)
My K2 does not drift at all. k4ia Craig "Buck" Fredericksburg, Virginia USA ** See what's free at http://www.aol.com. _______________________________________________ TenTec mailing list TenTec@contes
Perhaps I should correct myself. . . My K2 drifts no more than my Orion. k4ia Craig "Buck" Fredericksburg, Virginia USA ** See what's free at http://www.aol.com. _____________________________________
According to the poll at _http://groups.yahoo.com/group/orion565/surveys?id=12568813_ (http://groups.yahoo.com/group/orion565/surveys?id=12568813) 52% are using ver 1 software and he most popular is
I too am having trouble getting full output on SSB. k4ia Craig "Buck" Fredericksburg, Virginia USA ** See what's free at http://www.aol.com. _______________________________________________ TenTec mai
On my radio, the raspy CW is particularly bad with Fast AGC and narrow bandwidths (<1khz). It is starting to sound like the DSP in an ICOM 756Prox. There is a definite "thump" at the end. NR works be
The metal diaphragm headsets I refer to probably cost no more than a few dollars. They had a cloth cord and a round metal plate the size of the earpiece. It stuck to the magnet in the coil. Very tinn
Personally, I would be perfectly happy with insulated, quarter-inch brass bolts placed on the back of the transceiver, allowing the owner to connect directly from the bolts to the power supply Amen!
Let us know how your experience goes with the ARRL insurance. I found I had to really stay on top of them to get anything done. k4ia Craig "Buck" Fredericksburg, Virginia USA ** See what's free at ht
I was able to get paid without buying a new Quadra amplifier - I just told them I would rather not replace the damaged equipment. So, I am not sure you have to buy a replacement. k4ia Craig "Buck" Fr
Try the other insurance company. You buy as much insurance as you think you need - you don't have to insure everything for its full value and you don't have to list unless you go over $10,000. And, f
As I understand, the hardware upgrade is only necessary if you want to use the improved (?) sweep function available in ver 2. You can download and install ver 2 software and it will run without the
Master reset Upgrde to 1.373b5 k4ia ** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour _______________________________________________ TenTec mailing list TenTec@con
Blown diodes are usually the problem and that seems easy enough to fix but I understand you have to completely disassemble the radio (seem to recall you had to remove the finals) to get to them. It c
Just in time for Christmas! Pristine O1 with Inrad 600hz roofing filter, 1.8 TT roofer, hand mic, cables, manuals, original box etc. plus cooling fan, matching TT speaker, Microham Microkeyer cable,