I have a Centurion and it works fine on 17m - full output. Set bandswitch to 15m and, in my case, with my antenna, I set Load to 9.7 and Tune to 2.0. For 12m. I set bandswitch to 10m. and Load to 6.7
I spoke to Gary Green in the Service Dept. yesterday, and while I didn;t ask him about the flood, he didn't say anything abut it either and acted like all was normal there at the factory. So, my gues
Model 229 Tuner. 2KW PEP. 160-10M, uses very desirable modified "L" network. Will tune at least 10:1 SWR, any phase angle. Uses Silver plated roller inductor. Only 2 adjustments + fixed cap switch. W
Tuner is SOLD. Thanks for the bandwidth. Donald, K6RV _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
On June 7, 1965, I took my 20 wpm sending test with my Hallicrafters TO keyer in front of an FCC examiner in San Francisco, CA and passed my Extra Class Exam. Donald, K6RV ___________________________
Paragon's, etc. - works fine. Reason for sale is that I replaced it with an INRAD 400 Hz. filter in my OMNI V. $55 including shipping CONUS. Will accept USPS money order, Cashier's check, PayPal pri
I feel sorry for all you guys out there with those "new-fangled" Radios. If you only had an OMNI V, as I do, you would have theFACTORY Orange Ball on the front panel !! My radio is old, and so am I,
I have a Ten-Tec OMNI V - 562 and have lost my display. Have troubleshot to the VF Display Driver Board - 81447. Spent a lot of time trying to find out what is bad on the board, to no success. Have t
I have a Ten-Tec OMNI V that I resurrected and everything works except the far left digit on the display was always on - even when only 6 of the 7 digits on the display should be on, as on 1.8, 3.5,
I have been following this thread with interest because I too have a Centurion 422. Mine is Serial # 03A10058. Using Ten-Tec's code for Serial numbers: Mine was built in March, Production Run 1, Unit
It appears after reviewing my QSK board problem and the blown fuses in my Centurion, that I mis-wrote what happened. I indeed had the same symptoms you had: Blown fuses for no apparent reason. In my
Rather than going through all the mechanical/electrical changes to vary speed of the fan, just download SpeedFan (see link below) and it will read your computers fans, and you can control them. 73, D
Hey Rick, Guess I need to go back and re-read the discussion on fans - I thought I saw some reference to computers as well as radio gear. Glad the link might be useful though anyway. I have had an is
Bry, You definitely do have a blown QSK board. Those are the same symptoms I had - and if you re-read the email of mine below, it gives you all the info on how to fix the board. That board is very se
Ten-Tec does if you can't find them anywhere else. I bought one a couple of years ago and believe it was $50. Easy to replace yourself. Good luck. To subscribe or unsubscribe via the World Wide Web,
Please look at my ad on QTH.com - Ad #1137868. Thank you. 73, Donald K6RV _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman
For some reason, the ad will not come up using the number, which is correct. Please type K6RV in the SEARCH box and check the "find ad by Call", and you will see it. Thank you, Donald K6RV Thank you.
FOR SALE: TEN-TEC CENTURION AMP, MODEL 422. LOOKS GOOD, WORKS PERFECTLY - 1250W OUT WITH 90W DRIVE. USES 2 3-500Z TUBES. COVERS 160-10, INCLUDING WARC BANDS. AMP HAS FAMOUS TEN-TEC QSK - SECOND TO NO
AMEN ! And thank you John for saying what I, and am sure most folks on this list, were thinking . Donald K6RV I just blocked a bunch of neurotic crap sources. If you folks want to argue or beat dead
Looking for a KRX3 2nd RX for my K3. Please reply off list. TU, Donald K6RV _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailm