Good idea Mark. Until we figure out a way to add bass, middle, and treble control to the receive and transmit audio. I would suggest, running the output of your box into a Behringer MX 620A Mixer, th
The mixer can be purchased from any local music store for about $59. Since you are into CW, you would want to run the radio ext. spkr. out into either one of the mic inputs, this would allow you to u
I generally just monitor the reflector, but there have been two topics that I have been paying close attention to: 1. Grounds. There are 4 issues that we as amateurs should be concerned with. A. Ligh
press alt then rev 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (
thanks 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (text body --
I was hoping someone would clear up the ground loss issue. Its not until you put out a buried ground radial system and use the TT 1251 do you discover how much of an antennas current is being lost to
Look at the attached and feel free to distribute. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME parts -- mul
Way to go Tim, the same thing happened to me and my die hard Kenwood neighbor. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -
Thanks to all who joined the net tonight. Special thanks to ED for not removing R37. The Ten Tec net is an open forum for those who wish to discuss Ten Tec products. Talk to you next week, same time
Go to the store and get ON4UN's ($28) book on low band DXing. It's the bible. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report --
Yup, same issue here. The JUP v1.20 seems to have made some mod to the AGC, also I have noticed that the volume control is more linear. Unfortunately I don't have v1.19 so I'm stuck until TT comes ou
Downloaded V1.20. This update is not ready for prime time. Had to reinstall V1.19. It appears that some mods were made to the AGC. The receive is very sensitive with a very low noise floor. I like th
You can reload V1.19 from the TT flash software with no problems. V1.20 is not ready for prime time. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um.
If you have downloaded V1.20 and not happy. You can reinstall V1.19 from the TT flash software. Open TT flash, click on 538 V1.19 instead of V1.20 and reload it. My Jup is back to normal after reload
Version 1.21 is not on the download site. The only version that's there is V1.20 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report
Yup, my Jup does the same thing. When pressing the buttons as described displays a broken solid line and on the bottom right side of the display is the number 5066%. I am running Ver. 1.21 updated to
IMHO Owning a computer driven rig such as the Jupiter is very comforting no matter how many Versions of software this rig will see during its electronic life. Before 1998 all of us were sending our r
My fingers hurt from pushing all those buttons......gotta go soak 'um 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- process
Thanks to all for attending. We had 16 check-ins. Conditions were not very favorable so if I missed anyone I apologize......need more wire in the air. Next week Jerry KO4CH will be the Net control. P