Hello Everyone: Regarding commercial manufacturing of tubular coils/inductors what: (1) is the type of copper used, i.e. types 102, 110 etc (2) hardness is used for the copper (3) is the wall thickne
Hello All: How do you calculate the diameters and number of turns for most efficient link/tank antenna tuner coils, i.e. with input link coil/inductor on the outside of tank coil/inductor vs. link in
Hi to all: Does the swinging link method of input for the Link Antenna Tuner work well vs. the fixed link with a variable capacitor in series for tuning? Any thoughts on this? Chuck - AA5WG -- Get th
Hello to all: Has anyone had success with swinging links (Link Antenna Tuner) used with today's new equipment? Chuck - AA5WG -- Get the free Yahoo! toolbar and rest assured with the added security of
Hello to all ham radio operators: Does anyone have the ability to design the link antenna plug-in coils for the link antenna tuner? What are the proper ratios of outer diameters with given conductor
Hello everyone: What is the rule-of-thumb to calculate proper diameters for individual link/tank plug-in coil sets for a HF link antenna tuner. 73, Chuck - AA5WG -- Moody friends. Drama queens. Your
Hello to everyone: Is it OK to have a one turn link input coil if it is calculated to be at 50 ohms reactance? Chuck - AA5WG -- Shape Yahoo! in your own image. Join our Network Research Panel today!
Hello everyone: I read in an old handbook that the tank capacitor in this particular link antenna tuner was 200pf per section. I ran the math and it turns out the theoretical capacitance needed for 1
Hello to all: There is series tune and parallel tune and each may have low or high capacitance. What is low low-impedance with low or high capacitance for? Chuck -- Ready for the edge of your seat? C
Hello everyone: What size (capacitance wise) split stator capacitor should I get for a link antenna tuner that will cover 160 meters? What should the maximum capacitance be for each section of this c
Hello to all How much inductance should I look for in a 160 meter split-stator capacitor? This capacitor is for the tank or antenna side of link antenna tuner. I believe the math says a total of abou
Hi everyone: What would be optimum form factor for link/tank plug-in (coaxial) coils for a HF, 160m-6m, link antenna tuner? There would be 11 coils sets for above bands. Copper tubing, i.e. 0.250 and
Hi Everyone: Can anyone recommend or do you know of a simple to use Windows software program to design straight-line frequency air variable capacitors? It would be nice to design straight-line wavele
Does anyone have pictures and component values for a swinging link antenna tuner that works well. My swinging link antenna tuner will not work. I tried feeding the open wire line in the series (curre
Hi to everyone: What type of copper are commercial coil clips made of? Chuck -- Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. ____________________________________
Hello to all: I found a brass inductor clip for 3/8 round tubular inductors. I want to make some of these for a home brew antenna tuner. They are for the plug-in link/tank coils. What type of brass s