Hi Ken, While you're considering Cabrillo to .BIN, how about ADIF to .BIN. That would be in the spirit of open interchange. and probably be more widely accepted. 73, Tony, AD6ID -- WWW: http://www.k1
Hi folks, OK, my new IC706IIG is going to Field Day for the first time. It is not listed in the supported rigs for ct versions 9.40 thru 9.63. Which of the following Icoms behaves like a 706IIG? IC 7
Hello again, I found part of my answer on http://www.k1ea.com/radio.htm So, my 706IIG is now set at the address for a IC735 (04H), and the error from CT963 is _still_ "radio not echoing". Here's the
Hello yet again, I am running CT963 under DOS on a Toshiba Portege 7100 with the CI-V connection on COM1. I cannot get any communication using CT running under DOS. I t_e_s_t comm by typing a frequen
Hi All, Neither TRX-Manager nor Log-EQF have any problem tracking frequency changes on my FT1000MP. They poll it frequently; it doesn't send info unsolicited. I had trouble getting CT9.50 and CT9.40
It's beginning to sound like there may be a shortcoming in the FT1000MP command set that allows it to get into this stuck band reporting mode. I have _never_ seen a stuck frequency problem with TRX-M
Oh, yes. I'm in VFO mode I also notice that if I change freq from CT, _both_ bandstack registers on VFO A (main) are sent to the bottom of the band (14.000, 7.000). Then if I tune one and switch to t
Hi folks, I just ran CT 9.50 for the first time; 9.40 was previously installed. CT is able to control the FT1000MP via COMTSR1 by either typing a frequency in the call sign space or changing bands wi
Author: Jim Reisert AD1C <jjreisert@alum.mit.edu> (by way of Tony <ad6id@arrl.net>) (Jim Reisert AD1C)
Date: Mon, 23 Oct 2000 17:10:42 -0700
Yes, the .BIN file will work with either version. - Jim -- Jim Reisert AD1C <jjreisert@alum.mit.edu> http://www.ad1c.com -- WWW: http://www.k1ea.com/ Submissions: ct-user@contesting.com Administrativ
Just a couple of long shots, Frank (My 300MHz P-II only has LPT1) When you mention DX4WIN, I infer that you were running Windows 95?, on your old 486. To run PURE DOS as Brian mentioned, you must reb
Hi John, I asked this question of Yaesu last year and got the answer that the output of the internal keyer is in firmware; it is not a physical point. He also mentioned that they corrected their oops
Hi Jim & the group, I tried the telnet part of W4AN's article. I was able to run telnet on my PC ("telnet cluster.akorn.net" as a run command) and connect directly to the packet cluster. You should n
Hi Bob & all, OK. I sure wouldn't want to set lat and long every time I start the program. I put them in the config file along with everything else I can think of. But using either at the call entry
Gary and all, http://www.hosenose.com/w1gee.htm#lcu makes cables/level translators for darned near everything. The FT1000 and FT1000D require the level shifter; the FT1000MP does not (I use a $10 Rad
The syntax in the ct.cfg file is like this: ... LAT: 37.05 LONG: 121.5 ... not SETLAT, SETLONG Related - During ARRL SS Phone, F10 (Display Beam heading) did nothing. I used ct 9.43. It used to work
Hi folks, I finally got my FT1000MP connected to the computer. TRX-Manager communicates perfectly in both directions. So, success there. (Oh, and I got the Phillipines - spotted in TRXmgr DXcluster).
Thanks Steve, CT 9.40 communicates properly with the 1000MP. But there is no mention of a FT1000MP fix from 9.37 to 9.40 [Ken a place to add a comment in the history file] However, the other complain
Hi all, I had trouble with ct & 1000MP last month. With some help from you guys, here's what I found. CT 9.40 communicates properly with the 1000MP. CT 9.37 would NOT work with my computer, but the c
Hi folks, We'll be using ct.something for field day this year. The donated computer may be as lowly as a 286 with 4M RAM, maybe a 386. We will have no external connections for rig, rotor, DVP, networ