We live in a Plug-N-Play world Dan. What you are missing is the credit card bill at the end of the month. I can send you mine if you want one.... Bill AD8P ___________________________________________
I have been reading all of the posts regarding this subject and while I claim absolutely no scientific knowledge on the subject let me tell you what really does/will work base on my 40 years of exper
I recently saw a post about someone who has converted a TA-33 for use on 12 and 17 meters. Anyone who knows where such information is located please let me know as I have a spare TA-33 here. Bill ___
I recently bought a used LM-470 motorized tower and transported it here. However I have little to no documentation with it. Does anyone have the documentation that would come with one of these. I am
I am looking for hubs for a 2 element quad. I would prefer 3" boom style. I am aware of a company who used to make them but the owner is now a SK. Something like this would be perfect. Let me know of
I am in the beginning stages of a major antenna overhaul here. I already have (but not installed) a Tri-Ex LM-470D tower and I am trying to decide what to put on top of it. Recently I came across a C
Does anyone have one of the Lightning Bolt wire attachment clips that would be willing to send to me so I could see about duplicating them? I will be happy to reimburse you for your trouble and after
Some many months ago I either asked on this reflector or read on it about the particular piece of equipment some of you have used to dig a 3-1/2X 3-1/2X 7-1/2 deep hole for an LM-370 tower. I am at t
Thanks to everyone who responded both on and offline. I did learn one thing.....the hole will not be hand dug. I am searching for an auger from a number of sources. Bill AD8P ________________________
On Friday I met with a representative of a sign installation company. No problem digging a 4' diameter hole by his company. In fact they can do the rebar cage and cement work also. Total cost is just
I have my "new-to-me" LM-470 bolted to the raising fixture and resting in a horizontal position. I have been looking at the manual I have and it says to run the raising cable up thru the upper pulley
I am having to install a new pull up cable on my LM-470. While considering the replacement from a California company at a cost of $210 plus $90 shipping I got to thinking about rolling my own from lo
Thank you all for your wonderful and thoughtful replies. I have decided to eat the additional $300 and buy the factory replacement. Expensive? Yes, but I will be able to sleep well. Bill AD8P _______
Thanks to every one who responded both on and off list. I just wanted to give an update as to what has transpired. I thought I was "different". After all I had called and received a response from a t
Our club has been approached by a local company about the possibility of installing a repeater (somewhere in the 150 mhz range) on our 180' tower. Actually they want to place 2 antennas on it. In exc
Can anyone tell me if a T2X will fit inside the top section of an LM-470 crank up tower? I currently have a Ham-3 in it right now but I am sure the strain on the rotor will eventually be too much. So
I have a Cush Craft XM-240 antenna. I gave up on an earlier idea of interlacing a quad on the same boom but I have another question. Actually 2 questions. I have the elements to a "shorty-forty" 402-
I need another rotor for my antenna system. I have a TriEx LM470D tower with a rotor plate for a 4 bolt Ham-M rotor. I have a 3 element SteppIR, a 2 element Cush Craft XM-240 and an 11 element 2 mete
I am looking to locate an RC5 Create Rotor to fit inside my LM470 tower. I first Googled them and found a web site but the link no longer works. I haven't tried the phone number yet but I will later
I have located an email address and a contact person now for another question to the experts. Has anyone used a Create RC5 rotor inside an LM470 Tri Ex tower and if so what , if anything, did you hav