Common occurrence in 20 years of using WriteLog. It used to be VERY common in my 2nd floor shack, where I have had RF Feedback issues, but ferrites on LAN cable and switching to a notebook and USB Mi
Type in VER in the call sign, scroll to the end of the list, and you'll see the SCP Version Number,so you'll know if you have the most recent master.dta file. Type in VERSION, look at the Country Nam
My 10.69D still shows COUNTRY in the Entry Window. Barry, EI/W5GN _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/lis
Yes, it does expect/accept the zone in QTH for DX stations, and it populates both Zone and Country for DX Calls. And it won't let you type in a zone number for a USA/Canadian Callsign, nor can you ty
PLEASE NEVER SUGGEST NOT SENDING IN YOUR CONTEST LOG. ALWAYS SEND IN YOUR LOG, JUST SUBMIT IT AS A CHECK LOG, if you have not complied with the rules of the contest. Your Check Log is CRITICAL for th
The OPERATOR field has a CHECKLOG in the pull-down list. 73 Barry, EI/W5GN _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/ma
Contest Overlay IS supported for WPX, for ROOKIE and TRIBAND/WIRES, as noted in the rules: B. Single Operator Overlay Categories. Single Operator High and Low entrants may also submit their log for o
I used LapLink PC Mover to move 10.69D from XP to Win 7 Ultimate 64-bit on 64-bit hardware and thus far it works by itself with no problem. The Microham USB Router does not work on Win 7, but the ven
RFI into your rig is the usual cause of the mis-logged frequency/mode that causes the RED B. Change the frequency/mode and right click to claim contact and the goes away Barry, W5GN _________________
WriteLog allows only 20 characters for the url for the telnet connection, so using telnet.reversebeacon.net is not possible as that url is too long, but you can (from a DOS prompt) PING telnet.revers
I was unable to filter RBN spots from WriteLog. I had connected to RBN direct from WriteLog and issued the SET/FILTER K,VE/PASS command, but that was rejected by DxSpider as an "Invalid Command". N4Z
It's DEFINITELY NOT a generic problem with 10.80F; all 50 QSOs were pure CW lastnight and today. My second-story QTH has always been RFI prone, but once I put the LAN cable thru donuts years ago, my
Or CTRL-T will send a SPOT. And note that you can post the spot BEFORE you LOG the station, but AFTER you work him (of course, you can also spot the station BEFORE YOU WORK HIM if you want to invite
Won't do any good for ICOM's, at least thru the 756 family, as it doesn't provide a command to return that second VFO's frequency. --Original Message-- From: writelog-bounces@contesting.com [mailto:w
That reminds me of copying RTTY on 14.7 KHz from NAA in Cutler Maine in the '60s when we were submerged in The Barents Sea, when the on-duty Radioman missed that the receiver/atmospherics had dropped
Earlier this week, I asked support@writelog.com if they would be able to provide an update to WriteLog to support the CQIR (CQ Ireland) contest to be held starting at 1200GMT on St. Patrick's Day, Ma
I concur there is a problem in WriteLog when the Web Update pulldown is used - the wl_cty.dat file that is downloaded is back-level - it shows that GO0DEQ is England and VERSION entered for Call repo
There is a BIOS setting that you MUST change so the Function Keys function as they used to; why the manufacturers chose to change the default is strange. Barry Gary, Look closely at your F keys. Are