Who is the vendor making this comment? If this is true, it will be a problem for us. I won't buy YDI hardware. One alternative we are testing, for fixed wireless AP's and for hotspot's is mesh. So fa
That 3.20 or 3.70 displayed in the configurator when looking at the Lucent AP-1000/AP-II hardware is not a firmware revision. It is a hardware revision. The 3.20 units have the BNC connector and a 10
For the 3.20 hardware, you don't go past the 4.44-02 load. For the 3.70 hardware you can go to 4.45 load. Per Ed at support, (about 5 min ago), the issue with the 3.20 hardware is being worked on, bu
KN50 isn't the right thing for long distance at that firmware I see!!!!! It's good for short (and with PoE), and Lcaps from Wim Bos (Netherland) I place fore the others... PS: What about Karlnet? I p
What I am trying to do is get 180-200 deg of coverage with H-pol. The location is at a lake shore and I do not wish to waste power by radiating toward the water. I have a similar setup using V-pol 12
I currently have 2 16db H-pol sectors each with 100 deg beamwidth. I have a splitter and have carefully made the cables from the splitter to the sectors exactly the same length. I placed the sectors
At the moment, I mainly need ISP Base equipment..... Flashrom was what I was looking for. However, depending on price, I might be interested in CPE stuff...... Where are you all? For shipping I mean.
It is true. I confirmed it with a friend at Karlnet about an hour ago. Maybe we can change their minds with a few e-mail's..... Blair Davis West Michigan Wireless ISP 269-686-8648 A division of Camp
Kevin, This would be ok as far as I am concerned. My flashrom based towers are trouble free. I have lockup and reboot problems with my KN-205 and Lucent based Karlnet AP's but not with the flashrom u
What is going on at Karlnet? I have been trying to get some KN-50's, (no radio), for a few weeks now. Distributor says that they have been ordered from Karlnet, and every time the distributor calls K
I have several Karlnet Super Ethernet converters. They currently have Orinoco/Hermes I radio cards in them. Does anyone know if a Prisim 2.5 card will work in them? Blair Davis West Michigan Wireless
(Joe Correia)Can anyone recommend a high powered card that works in the kn-50 boards? --Joe Yes, the SMC2532W-B works well and the price from D and H is under $60 each. Blair Davis West Michigan Wire
www dot dandh dot com They sell only to resellers. If you can't and or don't want to get your own account with them, contact me off list and I'd be happy to resell them to you. Blair Does D and H hav
Karlnet up to 4.44 -02 seems to work fine on the AP-1000 hardware V3.20. All the AP-1000 with BNC that we have are hardware revision 3.20. Karlnet 4.45 will lock up the unit. I'm told the the beta 4.
I will be testing Trango 900MHz gear in a totally tree infested area later this month. I can provide photos, satellite photos and topo maps of the area when I do. I'll also provide antenna specs. Thi
I've come across a AP-200. This looks like a RG-1000 . It has 2 ethernet ports and an Orinoco Silver card in it. It is labeled as Agere Systems Model: Daytona. On the bottom it says Orinoco AP-200 An
Thanks Dan. Just trees, but, if you fired a bullet into the trees, it would not make it more than a 1/4 mile..... Tree infested!!! I keep wanting to rent a crop duster filled with Round-Up herbicide.
David, This area is on the eastern shore of Lake Michigan. A house that I would not give $30K for on a small lot sells for $500K. They have no other choices besides satalite. Can't VPN thru satalite.
A $499 CPE? And this is a 'Deal'!! Bull! Using the KN-50, adding my own antenna, I get a short range CPE for $210 and a long range CPE for $250. (my cost, USD) Why would I wish to trade these for a $
A $499 CPE? And this is a 'Deal'!! Bull! Using the KN-50, adding my own antenna, I get a short range CPE for $210 and a long range CPE for $250. (my cost, USD) Why would I wish to trade these for a $