In need of a Cushcraft ATB-34 for parts. In particular the Driven Element and 15 meter trap. Middle TN area a plus!! Contact: Wm. Freddy Curtis KC4GUG curtisf@dtccom.net _____________________________
I have an old Cushcraft ATB-34 Tribander that I have re-furbished. I have a couple of questions for this group. 1. Can I "stand" the antenna on its reflector leaning it against a fence post and check
Thanks to all who replied. I re-checked the SWR placing the reflector end of the antenna on a concrete block and pointing it to the sky. The SWR is at the "correct" levels on 10-15-20 meters!!! I app
Hello Tower Talkers: A local ham friend is planning to install a "first-time" HF Station. The problem that he has is that it will be located on the second story of his house. He is in great need of i
Hello Tower Talkers: A local ham friend is planning to install a "first-time" HF Station. The problem that he has is that it will be located on the second story of his house. He is in great need of i
Hello Tower Talkers: A local ham friend is planning to install a "first-time" HF Station. The problem that he has is that it will be located on the second story of his house. He is in great need of i
Fellow Tower Talkers: Does anyone know of a remote switch for Ladder Line. I have a 160 meter Horizonal Loop Skywire and have recently put up a 160 Meter Extended 5 Quarterwave Dipole. Each of these
Fellow Tower Talk Members: I am shunt feeding my Rohn 50 ft. tower for 160 meters and in need of a variable vacuum capacitor. Any sources for these would be appreciated. Thanks for any help. 73's, Fr
Tower Talkers: I recently acquired a Cushcraft ATB-34 Triband beam which I will be refurbishing. I have had another one of those for the past 12 years which works great. I am interested to find the 4
About Stadium towers: The University of Tennessee Amateur Radio Club has their tower on the top of the skybox on the east end of Neyland Stadium. Check their website: http://www.utarc.org/gallery2/v/
Tower Talkers: I have A Yaesu G-450XL Antenna Rotor. I have no problems with this unit until recently. After adding an Ameritron AL-811H amplifier, while going into a 160 Inverted L with 60 radials,
Fellow Tower Talkers: I have A Yaesu G-450XL Antenna Rotor. I had no problems with this unit until recently. After adding an Ameritron AL-811H amplifier, while going into a 160 Inverted L with 60 rad
Guys, The Yaesu G-450XL Rotor problem below has occurred again, after I replaced the controller with another one (Same model) I bought off e-Bay. This is frustrating.. I was careful not to have the r
Dink, Check out the following site: http://www.mds-ham.com/RC-1-H-Digital-Rotor-Control.htm I just got one of the MDS controllers for my Yaesu G-450XL rotor. The controller works great and fully "mod
John, I had a similar problem with the Yaesu G-450XL controller. I had got an Ameritron-811H Amp into an Inverted L 3 ft from tower. I fried the controller. Got a used controller off of e-bay, howeve
Todd, My Inverted L was much better on DX than my 160 Meter dipole or 160 meter+ loop. I have worked HI and the VP6 last season. I have worked numerous countries in the Caribbean, Central and South A
Richards, Thanks! I couldn't of said it better... The original poster wanted to know about the Inverted L. I tried to give him the good & bad I had experienced with the antenna. I appreciate my fello