Hi Jeff I had the same issue. Individual antennas have 1.1:1 to 1.3:1 but when in OMNI rise up to 2:1 So Never used OMNI 73, Jorge CX6VM/CW5W Enviado desde mi iPad El 5 ene. 2019, a la(s) 00:59, Jeff
Hello I will be doing coaxial grounding on shack entrance. Need to install ArraySolutions AS-303 surte arrestors on a copper surface. AS-303 have aliminium case. So, i will install them with two scre
thanks Dale unfortunatelly, this ArraySolutions only have one tab to add screws, so the surface will touch the copper in some point. https://www.arraysolutions.com/as-303u Take care mi amigo! 73, Jor
hello I want to build a 4SQ system, with four aluminium vertical antennas My terrain is not flat, so I will do some work to level the ground My question: is just enough to level the terrain where the
hello thanks to all for the help about that. Will update on my project! 73, Jorge CX6VM/CW5W -- 73, Jorge CX6VM/CW5W _______________________________________________ __________________________________
Hello I have a 15M6DX yagi and a single element 6 ft over it, on same mast. Both antennas are working very well, no interaction. My idea is to add a SteppIR, 3 elements, to use it on 12 and 17 meters
Dan you can find them in many places, Mouser, Farnell, Jameco, Electronic Surplus, eBay....... 73, Jorge CX6VM/CW5W -- 73, Jorge CX6VM/CW5W _______________________________________________ ___________
hello i need a NOISE FREE 1A power supply, 1A is enough. For 115-230 volts (international voltage) Do you know a good source to buy one? thanks! -- 73, Jorge CX6VM/CW5W ______________________________
hello again I need it for 12 VDC 73, Jorge El jue., 19 sept. 2019 a las 15:22, Jorge Diez - CX6VM (< cx6vm.jorge@gmail.com>) escribió: -- 73, Jorge CX6VM/CW5W ________________________________________
hello recently I bought two tubes i needed to repair my RX verticals at https://www.onlinemetals.com/en/buy/aluminum-round-tube you can check prices on the website 73, Jorge CX6VM/CW5W -- 73, Jorge C
hello third time I have my M2inc 15 mts yagi tips broken, now on driven element 2 years ago, M2inc asked me $28 for a 1/2´´ x .049 x 31´´ long tube, very expensive, but since i also needed the 3/4 x
hello Wayne thanks very much Yes, DXE have it for $5, so will be the solution Worst part, and expensive, will be to move the antenna to repair :-( 73, Jorge El dom., 17 nov. 2019 a las 21:03, Wayne K
thanks John DXE have it on 6063 material a reasonable price 73, Jorge -- 73, Jorge CX6VM/CW5W _______________________________________________ _______________________________________________ TowerTalk
hello John ok thanks for the information. I will be buying this one Just I am looking for the way to cut the 6 ft long tube in 3 pieces of 2 ft each for shipping to CX, DXE couldnt do that, so I am w
thanks very much Tim!! will do the order and email you thanks!! 73, Jorge CX6VM/CW5W -- 73, Jorge CX6VM/CW5W _______________________________________________ __________________________________________
I think Stan´s quide will work I have my HiZ veticlas that are shorter, starting with 1.5 inches x 0.065 wall uf for several years in a windy location and with no guys So starting 2 x .0120 I think w
Herb manual is online https://www.m2inc.com/FG15M4DX 73, Jorge CX6VM/CW5W El lun., 10 feb. 2020 a las 12:51, Herbert Schoenbohm (< herbert.schoenbohm@gmail.com>) escribió: -- 73, Jorge CX6VM/CW5W ___
hello guys! check here http://www.hamplus.com/ DXE sell this products in USA 73, Jorge CX6VM/CW5W -- 73, Jorge CX6VM/CW5W _______________________________________________ _____________________________
Hello Rich yes, I agree. I replaced my sixpack with a Hamplus AS-1202F for remote operation, controlled with Green Heron Everyware products. Great support from Jeff at GreehHeron 73, Jorge CX6VM/CW5W