Hello, On a related note, I was the winner of their Grand Prize a few years back at Dayton, which was a Roof Tower or $200 off a tower package. I couldn't use the certificate right away (job changes,
I have a F12 C4-SXL...a great antenna, same weight as a SteppIR, with 2 elements on 40. Ideally I'd have a 2 ele 40 and a SteppIR, but for one antenna, the C4-SXL does quite a bit, and works well too
By coincident I thought about mounting my extra 2 element Quad like this for ARRL Sweepstakes...either mounting it 'as pictured' or possibly straight up....Greg K0PJ/9 This post might almost be consi
I have the 17 foot GM Tower. It is very strong! I modified mine by ordering a custom rotor shelf that mounts at about the 10 foot level, which puts the rotor at a much better position than the 30 inc
I have a had 2 Gap Voyagers in my life... 1. I tried adding more 'radials'. Even tried 'elevated radials'. No luck on either, changed the resonant point. 2. The Antenna works OK on 160, GREAT on 80,
Could it have fallen down AFTER your QSO??? I use a dipole that is coax fed and has 3 elements on each side, a 16' a 33' and a 66' (that was before I tuned it so measurements are not perfect.) It als
I agree with 4 weeks! What's interesting is that my Heights Tower instructions says 3 to 5 DAYS, and I think I read on the universal site a simular number....lighter tower, perhaps? Greg k0pj/9 --Ori
Hi all, Does anyone have a picture of an Old-Style Heights Tower 4 Foot Steel Tiltover Base? I'm putting mine together and would like to double check a few things before I finish. Thank you in advanc
Greetings all, After 2.5 years of collecting parts, dealing with Heights Towers and a military deployment, I'm finally getting my old-style heights tower up. Thank you to all who replied so far on my
No, the 4 foot steel base is just fine, level, and correctly placed in concrete. The top of the titlover base has one of the base stubs (that is bolted in place, but stuck) is off by about 1/4 inch,