Hello Marc, Is there any product ID like " HA...." on this Rotator ? There are two different so called "Drehmast" rotators around, the smaller one I got myself but had to change the gear as the shaft
I am looking for the manual or circuit-diagram of this old rotator I got surplus. Any help will be much appreciated. 73 Peter _______________________________________________ See: http://www.mscompute
Hi all, I also have a problem with such antenna: This one I mounted today to the side of my steel-lattice tower with 32" face. This raised the SWR within the band and put its resonance to 14480Kc (lo
another antenna near >the20, or a set of guy wires?Sometimes antenna analyzers tell lies. If youwere using an >analyzer, try your measurementwith a regular swr bridge.Otherwise, there must be >somet
Hello Dale, you wrote very interesting stuff concerning my problem so it went up from the original frequency as well so no influence with each other, same as my 204BA same here... the tubings are pro
A small ex windmill tower has been installed recently at our clubstation DF0CG, www.df0cg.de The basic tower is 24m high and a rotating steel pipe of 14m has been added. Later in the year a 4-element
Hello Gary, I have good experience with 1/2" Heliax on crankup towers. My tower is 30m high and cranked down not more then 3-4 time the year like yours. The cables feed directly the antennas, no pigt
Martin asked: Question. Will CAT5 do the job? Distance is about 55 metres, say 180 feet. Hi Martin, That is exactly what I do, my run is 70m to a KR600. Iit is working without problem 73 Peter ______
Michael, what is the power rating of the G800SDX? Yeasu recommends just 20 AWG... By the way, CAT5 is not made for outdoor use, so lifetime of the jacket will be short and depending on the sunshine h
Hi all, During the contest at DF0CG last weekend we had some trouble when that beam was used while 160m was transmitting (9+ interference). The other 20m antenna was not influenced. The beam was dire
them) port adresses 80/tcp World Wide Web HTTP 80/udp World Wide Web HTTP looks quite normal, you will not get that if you stay away from websites ;-) it is the transferprotocol between the webserve