Well said Barry! WriteLog is a contest logging software and should not overloaded with functions I need in my all-day-logger only!! 73 + 55 Wolf, DL6JZ
Hi Tad & all, I think the best first step in using WriteLog is to download the Help file and to print it out. The next step should be to read it once without doing other things like install or use th
Hi Ken, tnx for our QSO's in the last IOTA contest. I made about 580 cw-QSO's using WL 10.41B and can not confirm your IOTA bug. But there is another problem which could produce your problem: If the
Hi Tad, that's exactly the right way! I am using the same configuration with my FT-1000MP and the notebook: - FSK, CW, PTT through a homemade interface to the one COM-port - rig control via USB-RS232
Hi Don, and don't forget to use the four Serch&Pounce memories. There you can store call, freq and mode of a cq-ing station whith one mouse click. This is helpful if you don't get him with your first
Hi Jerry, the setup.exe for WriteLog-updates looks for the file writelog.ini in the actual Windows-directory. There it will find the install path. 73 + 55 Wolf, DL6JZ
Hi Richard, may be you should try Service Pack 6a? I am not sure because I changed from NT4.0/SP6a to Win2000 before installing MMTTY plug in. 73 + 55 Wolf, DL6JZ -- --
Hi Bob, I had a TS-570 some months ago. There were absolute no problems with rig-control and WriteLog. It worked a lot better than the rig-control of my FT-1000MP. But my experiences say that it is i
Hi fred, there must be something wrong with your primary WriteLog installation. And the update alone on drive C: should not operate correct! I am running the same configuration as you: - drive C: is
Hi Steve, you are right. I have to apologize for my wrong information. The locations of the WriteLog components are found only in the file "writelog.ini" in the windows directory. In the registry I c
Hi Dave, welcome to the comunity of RTTY-contesters. You can be proud to have worked all 6 continents in your first effort. And you are right: RTTY-contesting is the right thing for disabled people a
Hi Bill, I don't know if it is possible to use one COM-port only for rig control and cw for the FT-1000MP. This question seems to be not very important because you have to think about PTT also. And I
Hi Bob, give the DXLab suite (http://www.qsl.net/dxlab/) a try. It is free and contains several independent application which interact together in a perfect way. - logging application - rig control -
Hi Wayne, look at the appropriate site of Don, AA5AU. If you haven't got his site in your favourites folder (?, but you should!) then go via the WriteLog site. He described the installation of WriteL
Hi Wayne, saving the configuration is another thing than saving the contest file! It is the last item of the Setup menu. Try this and you will find your port setup after the next start of WriteLog ag
Hi Jim, if you say WriteLog that you are running 2 radios you will be able to open 2 independent RTTY-windows. Look at the page of Don, AA5AU, for details. 73 + 55 Wolf, DL6JZ
Hi Archie, I had a TS-570D some months ago. It worked very well together with WriteLog in - RTTY (FSK with a KAM), - CW (CW generating by PC, PTT control via rig control) and - SSB. But I didn't use
Hello guys, I try to summarize my personal experiences with COM-ports, soundcards = and IRQ's over the past years.=20 There are two kinds of peripheral computer devices: 1. "Legacy" devices: That are
Hi Walter, may be the installation routine of your PCI soundcard didn't install the Windows drivers only but in addition the legacy driver. And this legacy driver seems to use the same IRQ as your IS
Hi Scott, you are right. I am sure that I read somewhere (it was long ago so that I don't remember where) that the rig control of WriteLog controls the VFO A of FT-1000MP only. So you may not say tha