Hi Jim, I don't use FM-repeaters. But I must say that 90 % of them can be activated only by a 1750 Hz tone. Thatswhy there are special EU-versions of FM-HTs and FM-mobiles. But there are some FM-repe
Hi Gary, be lucky that your computer has got a serial port. You should use this port for the time critical purposes, as there are CW and FSK. Rig control will work fine with most of the usual USB to
Does the interface has an optocoupler for the PTT-Line. Then it will not work for FT-1000MP and may be for the FT-990 also. I made some experiments with my FT-1000MP with the result that the voltage
Hi Steve, WriteLog tries to get the KAM into the host mode. This procedure will fail if the PORT-parameter of the KAM was set to "VHF" during the last use with another software. You have to type PORT
Hello Steve, the following workaround solves this problem on my side: Every cw-buffer starts with a space. Can be it help for you also. 73 + 55 Wolf, DL6JZ Steve Woodruff schrieb: ___________________
Hej Jan, my KAM doesn't work correct via a USB-to-RS232-converter. There are occacional lost letters in the transmitted and received text. The best and I think the only way would be to use the new US
Hi Bob, you are not fully right. Think of the WAEDC. In the MOST category there are several transmitters TRANSMITTING at the SAME MOMENT allowed. The 2nd, 3rd,.. transmitter are allowed to work mults
Hi, DM5JBN and DM3PKK are well know calls in DL. Could there be a decoding error? 73 + 55 Wolf, DL6JZ Floyd Sense schrieb: _______________________________________________ WriteLog mailing list WriteL
Hello Steve, some times ago I built up two computers with different motherboards. Both motherboards had AC97-soundsystem onboard and oth should work with two soundcards under Win2000. - For the first
Hi Rick, there are some other ADIF-fields missing in the exported WritrLog-log too, e. g. <TX_PWR>, <COMMENT>, ... I do use the <COMMENT> field to indicate wether I worked from home or from the conte
Hi Steve, I had a similiar configuration as you some years ago. The best way for me was: 1. To change to keying through a COM-port. 2. To begin every cw-macro with a space character. That helped for
Hi Nelson, I had the same problem as you. But I am at QRL now and don't have the manual with me. But I am sure that the solution is very well descriped in the help file. The keyword for this solution
Hi Bob, did the sut downs happen when the FT-1000 MKV was connect to the computer? 73 + 55 Wolf, DL6JZ Bob Gates schrieb: _______________________________________________ WriteLog mailing list WriteLo
Hi Richard, I get this message also. The reason in my case is that WriteLog is configuered to start with two MMTTY windows. The second one is the clone window for receive only. So I have to set the p
Hi, the sponsor of the WAG contest prefer to get the logs in the .stf format. This has a modified cabrillo structure. In WriteLog you are able to produce an .stf file if you use the appropriate WL mo
The Help file in WriteLog is not very exact at this point. This sentence means only that in the CW and SSB part of the WAEDC only station outside Europe are allowed to send QTC but in the RTTY part e
Hi Phil, I think this is not a good idea!! Why don't you want to have a dupe in your log? There is no reason for that. My opinion is: Better more dupes than less points!! There are no penalties in th
Hi Phil, try to reboot your computer before installing an update. 73 + 55 Wolf, DL6JZ ComponentMoveData had the following error: Media Name: Media Component: File Group: File: Error Number: -132(refe
Hello Vince, my opinion about sending logs is a little bit different than your's. For me it is a matter of ham spirit to send in my contest log. So the contest sponsors are able to make the cross che
Hi Jim, my experience was that I had to start all CW macros with a space character. Also used Win 2000. 73 + 55 Wolf, DL6JZ _______________________________________________ WriteLog mailing list Write