Alan, The Paragon II audio bandwidth and fade controls seem to have more effect on the audio than the speaker. I get plenty of volume on my 962. Regards, Ed, N5EI ____________________________________
Hi, I had the same problem with a Paragon 2 and a 229B, but only on two bands: 40 and 30. The problem goes away IF I disconnect my Ten-Tec 705! I think the problem is RF feedback thru my mike. I plan
I have recently traded my Paragon II for an Orion. I have surplus the 282 (250 hz), 285 (500hz) and 288 (1.8 Khz) filters. The 288 does not have "288" written on it but is a Ten-Tec 1.8 Khz filter).
I have recently traded my Paragon II for an Orion. I have surplus the 282 (250 hz), 285 (500hz) and 288 (1.8 Khz) filters. The 288 does not have "288" written on it but is a Ten-Tec 1.8 Khz filter).
[Corrected, thanks to Ken Brown] I have recently traded my Paragon II for an Orion. I have surplus the 282 (250 hz), 285 (500hz) and 288 (1.8 Khz) filters at 6.3 Mhz. The 288 does not have "288" writ
I have recently traded my Paragon II for an Orion. I have surplus the 285 (500hz) and 288 (1.8 Khz) filters. The 288 does not have "288" written on it but is a Ten-Tec 1.8 Khz filter and has the 1.8
John, The Paragon II has FM built-in. If you are considering Computer Control, the II or the Giehl Chip Set are required. If you look in the TenTec Contesting archives, you will see a few more differ
For Sale Ten-tec 285 0.5 KHz 6.3 MHz filter $65 plus shipping Ten-tec 288 1.8 KHz 6.3 MHz filter $65 plus shipping Surplus now that my Paragon II is traded and my Orion is here! Ed, N5EI Plainfield,
I have a surplus 285 filter (500 Hz) for the 6.3 MHz IF of the Ten Tec Omni s and the Paragons. I'd like $65 plus shipping. Ed, N5EI (603)298-5716 _______________________________________________ TenT
I have a surplus 288 filter (1800 Hz) for the 6.3 MHz IF of the Ten Tec Omni s and the Paragons. I'd like $65 plus shipping. Ed, N5EI (603)298-5716 _______________________________________________ Ten
I have the W9GE Orion set up document for firmware version 1.372. Is there a similar document for the latest version 2 firmware that came with my Orion two weeks ago? Thanks in advance. Ed, N5EI ____
Tim, Page 22 of the manual has the relevant details on entering freqs. into memory. Use VFO A > M or VFO B>M and then the Multi to decide where you want the values stored. RECALL on page 13 and 14 te
I have a surplus 285 filter (500 Hz) for the 6.3 MHz IF of the Ten Tec Omni s and the Paragons. I'd like $65 plus shipping. Ed, N5EI (603)298-5716 _______________________________________________ TenT
Allan, I have Hughes.Net (formerly Direcway) Satellite Internet. I concur. One delay is to the satellite. A second is to the ground station. Then there is the internet delay that could be across the
Bill, When you turn on the system, you must hold down the User 2 button while flipping the on switch. Wait till the Update ROM screen comes up, then run the executable. Never having updated before, I
I am considering purchasing a Model 253 auto tuner and would welcome comments about using it on 10 bands both with and without a Centaur. The Orion does not have a built in antenna tuner. Thanks for
I wanted to use my Orion with a 253 on 60 automatically.. I found out that the 311 band converter and the 236 cable does NOT connect 60 meters to the 253. So I got Larry R. Riley of Riley Accessories
Ron, The TT311 is still available. It was about $96 when I got mine about a month ago. It is a box with circuits and gates in it that convert 10 bands into 7 frequency ranges. Several bands are combi
Dennis, Have you checked the internal menu for audio? Have you verified that you do not have the volume on mute? These have caught me. Ed, N5EI _______________________________________________ TenTec