Any of you long term Karlnet distributors able to generate license keys for v3.79 BIN files? Karlnet themselves will no longer generate KEYS for version 3.79. I have acquired an older 2 Port FLASHROM
No problem Bill. I appreciate what you have done, I thought my system had been hacked!!! Good to have you back. Eric Meth IES Communciations Cornwall Ontario --Original Message-- From: karlnet-bounce
Thats a good price! Put me down for a few. Eric Meth IES Wireless Cornwall, Ontario Canada I'm looking into having 1000 of these made at an injection moulding facility. I have 2 questions for everyon
1) If it is a Hyperlink radio they will have the license key. Contact their customer service. If you know who originally purchased it they should be able to track it down. 2) Karlnet ver4.xx software
You can set the upload rate limit on the transmitter. The download rate is set by specifing the rate on the ethernet interface. How do you limit a user to a certain bandwidth? The only setting I can
Chris. In version 3.88 it worked properly, you could set the rates individually. Since then, setting the MaxTxRate sets both. Asymmetrical does not work. Karlnet suggests setting the transmit rate on
Set up a "queue" for the speed you want. If you are familiar with MikroTik, you will know what I mean. If this is "Geek" to you, get ready for some interesting learning!!! check out http://www.mikrot
We use another supplier and we usually have a couple in stock for our clients. Email me off list and I will give you a couple of other names. Eric Meth IES Wireless emeth@ieswireless.net Along the sa
Setup SMTP in the Karlnet unit (it has to be a satellite, or base unit, not the NDIS card). Make sure your "read only" password is public, and fire away. I monitor my entire network like this. If you
Sorry for the false post a moment ago You have it set correctly on the RG: Open Remote Config Setup General and enable the options you want (Outgoing NAT and DHCP) You only have to use incoming NAT i
By comparison, we are relatively small. We are located 60 miles west of Montreal, 60 miles south of Ottawa along the St Lawrence River bordering upstate NY. We currently have 5 POPs from one main sit
Norm. Any KARLNET vendor should be able to get licenses in a very short time. I will order 5 and have them available if you need them. Eric Meth IES Communications Cornwall, Ontario Hello guys, We ha
Norm. If you already have accounts on "license-it" then you are already setup as an ISP by one of the Resellers. Easiest thing to do would be contact any one of them rather than setting up yet anothe
Hi everyone. With an august body of knowlegde that we have here I am going to ask for your help! I am having trouble loading the Compact Flash module in a Teletronics Remote CPE. I have followed the
Norm. This problem was reported to Karlnet several weeks ago and I think is on their list of "one of these days we have to get around to that" My solution, that was forced by another issue, was to do
I have one installed and operating with no problems. That particular gets 6mbps throughput, using ping fill, to the nearest base station. It took a while to get going as the early firmware had some p
I flashed it as an 64 User ISP base but it is running as a satellite at the moment. I am using the standard Lucent Silver Card but I have use a Senao 200mw card as well. Thanks Eric, i think, that yo
I have one installed and operating with no problems. That particular gets 6mbps throughput, using ping fill, to the nearest base station. It took a while to get going as the early firmware had some p
I flashed it as an 64 User ISP base but it is running as a satellite at the moment. I am using the standard Lucent Silver Card but I have use a Senao 200mw card as well. Thanks Eric, i think, that yo