--==_426125435==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Really there is only one file that has to be saved and copied. That is the ini file. I find it just as easy to just d
--==_426498292==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I again ask, has anyone made a contest module for TARA PSK31 this weekend or is there one of the modules that would w
--==_435074764==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I did not see this but then I run Dimension.4. That keeps my clock in sync at regular intervals. Gil Baron http://mem
--==_442055932==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I can tell you that WIN2000 will NOT support ANY LPT operations. Other than that it works fine for me for everything
--==_442362623==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I will use the North American QSO Party RTTY. It is the only one with a NAME field that I can find and Name is requir
--==_443975282==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Can I set up so that WriteLog PSK Control (The PSK31 tuning window) is not ALWAYS ON TOP. I don't like anything to cl
--==_23537545==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Well I hope it happens. It would be HUGE improvement and a TOTAL death bell for TRLOG. I can't wait! Gil Baron http://
--==_28405414==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed No, it does not drive the speaker. You need a code generator and use the COMM to key it. I wish it did key the speaker
--==_62595577==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Open Window/Band Summary and there you have it. Gil Baron http://members.home.com/gbaron W0MN 44.08208 N 92.51263 W 10
--==_878933==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I did a delete of a QSO. I then shut down WriteLog. When I started it again, the QSO was back. The problem is that the c
--==_972638==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed But the field will only be 4 characters wide, won't it.? Also, can you make it a required field. That was Gray for me wh
--==_4889240==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed DEZ, you are correct. You can add NAME and make it wide if you call it something like Name of operator field. It also h
--==_14997745==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I am using a Kenwood TS870. Since you cannot use PTT on a COMM port that is not the one controlling the rig and al my
--==_22527472==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Perhaps you can explain. I read and read and read and looked at the port setup and I do not see how. REALIZE that is m
--==_37108499==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed RS232 on Back of TS870 PORT 3 -->## Radio Control Interface PORT4-->## RigBlaster RS232 This controls PTT and Micropho
--==_39203151==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed DTR is on or it would not key the RigBlaster. It is definitely on. It is not keyed with other programs with EXACTLY th
--==_64536398==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I do not know how many tgimes I have to say this. REMOVE RIGBLASTER< HAVE CABLE HANGING LOOSE. 1.Writleog NOT running
--==_4152490==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I read and it says NOTHING about this. I tried everything I can think of. Nobody has said that DTR is not going to be a
--==_633931==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed I thought about that but It would not work because after testing I find that RTS is also asserted at all times. In other
--==_1160458==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed If you change the frequency of the radio manually then search and pounce memory works ok to restore the previous state.