Mail Archive Search: <+from:gdaught6@leland.stanford.edu>

Results:

References: [ +from:gdaught6@leland.stanford.edu: 139 ]

Total 139 documents matching your query.

121. [AMPS] IMD measurement scheme (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Wed, 23 Jul 1997 08:27:51 +0008; hi tom, (snip) how do you recommend this be done? a combiner/splitter? a resistive mixer? (high power resistors would be necessary) what's your method? 73, George T. Daughters, K6GT -- FAQ on WWW: ht; /archives//html/Amps/1997-07/msg00182.html (7,937 bytes)
122. [AMPS] IMD measurement scheme (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Thu, 24 Jul 1997 11:34:24 +0008; thanks to all who answered my combiner question! it seems like the "schmutz" level stays pretty constant... so that often means that the "signal-to-schmutz" ratio goes down when the power output is r; /archives//html/Amps/1997-07/msg00205.html (8,114 bytes)
123. [AMPS] AB2 Amps (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 25 Jul 1997 15:20:55 +0008; yes, but be careful! we don't want that extra power output to be anything but DESIRED SIGNAL! if it all goes into frequencies which are clobbering other folks on the band, and getting the "worked-all; /archives//html/Amps/1997-07/msg00218.html (7,698 bytes)
124. (Fwd) Re: [AMPS] AB2 Amps (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 25 Jul 1997 15:41:30 +0008; hi all, OOOOPS!!! apologies to all! douse the flame throwers! i goofed! that should be " it's **NOT** worth it"!!!!! 73 again, George T. Daughters, K6GT -- FAQ on WWW: http://www.contesting.com/ampfa; /archives//html/Amps/1997-07/msg00219.html (6,888 bytes)
125. [AMPS] Re: [overshoes] (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Thu, 5 Jun 1997 14:14:08 +0008; hi tom, this is a well-known (to some) problem... e.g. 87a owners who keep getting triggered off by these spikes. and lots of transceivers are guilty of this it, by the way!! putting an ALC in the am; /archives//html/Amps/1997-06/msg00029.html (7,832 bytes)
126. [AMPS] dummy loads (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Sun, 15 Jun 1997 01:24:22 +0800; hi ampsters, i am designing and building a 1.5kw linear amplifier, and i'm to the stage where i've roasted an MFJ264 air-cooled 1.5kw dummy load. it is now a 150 ohm unit. i know they only dissipate; /archives//html/Amps/1997-06/msg00220.html (7,715 bytes)
127. [AMPS] dummy loads (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Mon, 16 Jun 1997 04:59:38 +0800; hi tom, thanks for the e-mail. i'm a physicist, so i'm not confused by things like : power = energy/ time; or , if you like, energy = power x time yes, that's when the power being dissipated is equal; /archives//html/Amps/1997-06/msg00224.html (9,052 bytes)
128. [AMPS] Re: do it yourself!? (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Wed, 18 Jun 1997 16:05:15 +0008; hi rich and ampsters, neat! i didn't know that (amongst billions of other things). but it seems slightly beyond the capabilities of the average ham. i mean even the average amplifier builder, who is; /archives//html/Amps/1997-06/msg00270.html (8,693 bytes)
129. [AMPS] Re: acetylene (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Thu, 19 Jun 1997 03:57:14 +0800; hi rich et al. let's see; after i solve my present dummy load problem, i need a vacuum pump (1 micro-torr? better?) and a way to make the seals, and... well, i know hams gather lots of "stuff" ... i; /archives//html/Amps/1997-06/msg00275.html (6,855 bytes)
130. [AMPS] regulators (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 27 Jun 1997 09:31:37 +0008; hi group, as i recall from my years in the semiconductor device biz, specifications like this are written for conditions where the device is giving near "optimal" performance. it doesn't mean other v; /archives//html/Amps/1997-06/msg00369.html (8,036 bytes)
131. (Fwd) RE: [AMPS] Alpha models: 91B vs. 89 (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 9 May 1997 01:20:55 +0800; hi morel and "amps" folks, i have to disagree with that one! if an amp (triode *or* tetrode) is cathode driven, then morel is 100% correct... but the 91beta is *not* cathode driven. the exciter drive; /archives//html/Amps/1997-05/msg00052.html (7,456 bytes)
132. [AMPS] New Svetlana 3-500Z Replacement? (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Sun, 11 May 1997 18:18:43 +0800; hi dick, yup. i don't know when it's officially going to be available, but i'm pretty sure prototypes exist. 73, k6gt -- FAQ on WWW: http://www.contesting.com/ampfaq.html Submissions: amps@contesting; /archives//html/Amps/1997-05/msg00066.html (7,281 bytes)
133. [AMPS] Re: [super cathode] (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Thu, 15 May 1997 14:15:41 +0008; hi all, not necessarily. 'super cathode driven' is where a fraction, call it "k" of the driving potential applied to the cathode is applied to the grid as well, thus providing some negative feedback.; /archives//html/Amps/1997-05/msg00121.html (8,479 bytes)
134. [AMPS] Re: [super cathode] (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 16 May 1997 08:34:39 +0008; hi rich, yup. the gain inherent in a tetrode is pretty effectively abolished, and the tube functions as a low-mu triode! (note the term RF! ^^ right there!) YES, it can!! an UNreasonable operating po; /archives//html/Amps/1997-05/msg00124.html (8,630 bytes)
135. [AMPS] 4cx1600 (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Sun, 18 May 1997 16:29:04 +0800; hi dennis, yes, i think i've got mine playing, after a bit of fussing. no "secrets" to reveal however. "passive grid driven", cathode degeneration, 2500V on the plate, -56v on the control grid, and 3; /archives//html/Amps/1997-05/msg00153.html (7,309 bytes)
136. [AMPS] Re: [fuses] (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 23 May 1997 08:36:45 +0008; hi rich et al., what will they act like? i remember doing some research (back in the early 60's) into the use of the common cylindrical glass fuse as protection for expensive (then) semiconductor cir; /archives//html/Amps/1997-05/msg00201.html (7,195 bytes)
137. [AMPS] microwave ovens (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Thu, 29 May 1997 12:16:37 +0008; dear group, i'm in trouble here, trying to sort out the truth. we have those who say that k2aw uses microwave oven diodes... we have those who say that k2aw assembles blocks using the very diodes oth; /archives//html/Amps/1997-05/msg00275.html (8,079 bytes)
138. [AMPS] Diode Blocks (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Sat, 31 May 1997 01:48:48 +0800; hi again, but that doesn't preclude their having been made in taiwan. do k2aw's blocks work? there have been zero complaints registered. are they more expensive than something else? yes. they're also; /archives//html/Amps/1997-05/msg00295.html (7,951 bytes)
139. [AMPS] 1500 w dissipation limit (score: 1): Author: gdaught6@leland.Stanford.EDU (George T. Daughters); Date: Fri, 18 Apr 1997 15:00:33 +0008; dear group, let's see. the alpha 87a and 89 use two 3cx800a's; the 91-beta uses two 4cx800a's; the CT hf-2500 uses two 3cx800a's... so there are those amongst us who would propose a rule that would g; /archives//html/Amps/1997-04/msg00257.html (7,689 bytes)

Current List: 121 - 139
Page: [1] [2] [3] [4] [5] [6] [7]