Greetings I need to work on the rotator shelf in my USTower HDX-772. I've been told SOP is to have tower completely retracted, use UST lowering device to tilt-over tower to near horizontal onto suppo
Thanks Scott -- great pictures. Congratulations on your new tower. My HDX-772 is extended to about 32ft when the top section has extended about 5ft and the rotator shelf is clear. The large bottom se
I have an UST HDX-772MDPL (spec 700lbs, 70sq ft @ 70mph) with a SteppIR MonstIR and F12 Sigma-280 Magnum mounted, so yes UST does have additional towers available based on HDX-5106 design. Steve Morr
John, your same question was asked about a year ago on this list regarding what tower to use for a DB-36. I have an UST HDX-772MDPL (spec: max load 700lbs, 70sq ft @ 70mph) with a SteppIR MonstIR and
A toe jack/lift functions well for this purpose. I use a welded toe jack bracket (PD Machine 978-273-4841) that slips over a 4-ton bottle jack to lift my UST HDX772 MDPL. Toe jack has "L" shaped brac
What Steve K7LXC omitted from his question regarding the M2 mast clamp and mast friction situation is the mast size, but Grant KZ1W made a great recommendation below to increase the contact area for