I'd start by assuming the internal meter is correct, and look for a bad connection between the radio and the external tuner, power meter, etc. 73 de Gary, AA2IZ TenTec service is level around 5W, but
Bill, Did you do a master reset ? 73 de Gary, AA2IZ Hello Gang, Downloaded Jupiter rev 1.24 Sunday PM and while it gave me Xmit on 60 mtrs(into a 50 ohm dummy load of course), I lost Xmit capibilty o
That's a bummer Jim. Hope you get it back as soon as is practical. I've come up against infant failures in my line of work too... and its a b*tch ! 73 de Gary, AA2IZ
That is an interesting comparison. Now, I wonder what would happen if you repeated that test with an actual antenna in the place of the dummy load. That might represent a worst case load. Of course,
Well, I think you guys are both right. The DSP operates ahead of the audio stage, and thus can be called IF. Of course, the frequency of 14 khz is certainly in the audio range. And no - we could neve
I see that Carl has said he will have 60m support for the Peg and Jup in his next software release on June 1. I assume this means that they are both 60m ready - given the right software. 73 de Gary,
Yes, that is correct. 73 de Gary, AA2IZ I picked up a Heathkit SB-200 at Dayton and if I read my manual right I need to build an external relay to handle the ALC voltage and handle the antenna relay
True, my DSP-59+ also complains when it gets too much input. However, I would also note that it works best when given plenty of input - rather than the absolute minimum. So, I think this is more supp
I have all my computers and stuff on UPS units as they are the only way to keep things stable in my rural location. A UPS of the size you need is not expensive. I have units that will do 800 watts, w
Yes, ethernet only is the idea. Wireless ethernet better still. Or how about the following instead: 1. An updated Pegasus (Pegasus II). Use the same synthesizer, A to D and DSP design of the Orion. H
Bill, You are right about one thing for sure... if you were a contesting nut like me you sure would demand every possible watt. I have exactly the problem described in the earlier post. That is, my C
Yes indeed...to all.... but Ethernet gives you better possibilities for remote control of the rig. make sure and computer wires going rig of network more
I can offer my thoughts on RTTY. First of all, I use both PSK31 and RTTY. I also do slow scan TV. I use my sound card and software for all of these. So to me, it's not a hardware or software issue th
Heh... even us 'Yankees' like NASCAR !! Seriously though, I think it is important to be carefull to separate our preferences from 'real' bugs. We all like/dislike certain features. This doesn't make