Noel, Did you try the ByteRunner site? http://www.byterunner.com/windows_2000.shtml I have several Byterunner cards and have allways managed to find the correct drivers on their web site. Gordon - N1
Ed, What is the RIT clear command for the Icoms?? I have a Pro 2 and can not find such a command in the listed commands in the book. Thanks, Gordon - N1MGO Gordon - n1mgo n1mgo@arrl.net _____________
Hi, I have seen this with multiple radios (Icom, Kenwood) I narrowed it down to RF getting in the rig serial control line and getting bad frequency data into the computer. When I added shielding to t
Gary, I run V11.02A and also occasionally see the same problem. I don't usually get it on start up, but have once or twice. I run SO2V with a k3 and get it more often than when I am running just So1R
Hi, I'm running version 11.22g and I am unable to get writelog to network. I do the "tools-register to accept network connection" on the run computer its set to name: n1mgo1 Letter is set to A on the
During the CQ WPX RTTY contest we had lots of problems with delay in tx when using any fkeys. We were running Multi-Op single tx, a setup we have used many times. The hardware is a K3 with KPA-500 am
Can Writelog remote be used in a multi/multi enviorment? example: 2 or more radios/computers at same location configured to run remote. users logging on from various places, will the logs be combine
Wayne, thanks for the information. I was also considering using VPN's from each user to the radio site. That simplifies some setup and control for other things, and maybe for the writelog. I nee
Steve, There is only one USB to serial adapter that I have found that will do FSK, the Digi Edgeport series. I have a 2 port and a 4 port, but they also make 8 port versions. They are very expe
I'm trying to setup my K3 for remote operation, using WriteLog V12.45D. I had no problem setting up the remote side, but when I go to the control computer (in-house same subnet for testing) I can c
Tom, I am just using the remote software with the "Soft win 1" slot to get the virtual front panel to the K3. This works fine, the problem is in the WriteLog "QSO Entry" panel, "Radio" button, t
On 12/29/2019 17:12 PM, Wayne wrote: Tom, I am just using the remote software with the "Soft win 1" slot to get the virtual front panel to the K3. This works fine, the problem is in the WriteLog
Can Digirite be remoted like RTTY? I have the remote setup working for RTTY for the upcoming ARRL RTTY RU, but don't see how to remote the Digirite. Thanks, Gordon - N1MGO __________________________
How do I set the baud rate for the radio comms to 115200? I'm using the USB port on the Kenwood TS-590sg. I can not change the baud rate on the radio at this time, it is remote and set to 115200. T
Any info on setting up the bandmap with the RSP1 SDR? Thanks, Gordon - N1MGO _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/
I have an RSP1 connected to my TS-590sg DVR output. It works fine with HDSDR to provide a bandmap. How do I setup WriteLog to use this as its bandmap SDR? Thanks, Gordon - N1MGO ___________________
Don, Thanks, I read all of that, but found nothing specific to the SDRplay RSP1. I'm trying to integrate it to the Kenwood TS-590sg setup with WriteLog. Once I have that working I should have a
Select setup; Writelog options; SDR Setup; at IQ Source choose IQ provided via ExtIO. Click Center Frequency Setup and in the "Writelog supports SDRs configured in the following way window" At "SDR i
Gert, This got it working! The secret was the bandmap window size, I had it too small. Thanks for the help. Gordon - N1MGO Select setup; Writelog options; SDR Setup; at IQ Source choose IQ pro
Don, I just used the "Contest" tab, "Cabrillo" entry (bottom of the menu) to generate my n1mgo.log file. The contest robot accepted the file with no complaints. Gordon - N1MGO https://www.rttyco