I have a SteppIR 3 element beam (20 thru 6 meters) with controller which is NIB and never opened. Since my station is at times operated remotely in contests my 3 element quad is broad enough to handl
I have an orphan Yaesu G-8000DXA controller and would like to know if I can replace by G-450A control box with it without any modification? The plugs are the same and from the schematic the control c
Thanks Dan as I am starting to get somewhere with this. All the cable pins seem to match but Ii will do some more comparison of the two circuits to make sure. Although Pin #1 on the G-800DXA is there
With such a high amount of copper theft some AM radio stations in Puerto Rico choose to replace their radial field with inexpensive buried barbed wire. They would plow it into the ground with a Ditch
On simple test for the performance of any radial, and I have used this method to detect broken buried copper at an AM station, is to run abut 20 watts into the antenna, then hold a good field strengt
I came into the possession of two unusual high power baluns, one with 125' of RG-213 attached and the other with a two foot lead of coax attached. They are seal and inside PVC with the coax going ins
Yes indeed 800 ohms is perfect as a termination. This device seems to be a real brute and may have come from military surplus as they used T2FD antennas for many installations because their work was