I need to know the pinout of the 9-pin OMNI D accessory jack. I have looked a several of the online manuals and everyone is missing the block diagram which has this information. I am guessing that it
Thanks Barry. Now I am confused. N4RS provided a pinout which is very different from this. Could someone please clarify. Maybe there is more than one configuration. __________________________________
Yes, that is what it says. The only problem is that every online manual I have seen does not have that page. -- Original Message -- From: "Richards" <jruing@ameritech.net> To: "Discussion of Ten-Tec
Thanks Rick. It looks as if Ten Tec never settled on the pin definitions. They are difference between the OMNI versions. I was hoping that they were all like the Corsair II, but not so. -- Original M
Hi Scott, That should not be happening! We will have to do some investigating to find out why. I need to know if you have the RIT pot set up in the manner described by W0CCA. If you do and you are su
Gentlemen, The problem has been solved. The RIT pot, which is now associated only with the DDS, was not properly connected. Nothing related to the Corsair II here. Thanks for your help. I appreciate
Hi Scott, Part of the source is AGC I believe. Use Slow AGC and Slow QSK and that will get rid of a good bit of it. Sidetone keying is another source. If you get rid of these two sources, there is st
Scott, Thanks. I will certainly put it on my site. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Too much stuff. The OMNI VI+ (564) is full of filters, like new as is the power supply/speaker (962). Will sell together or separately. Neither modified in any way. Photos available. Joe ____________
If someone has a pdf copy of the 961 manual and could email it to me I would very much appreciate it. Joe _______________________________________________ TenTec mailing list TenTec@contesting.com htt
I am sort of interessted in purchasing and Eagle, but there's the IMD issue. Please tell me it ain't so, especially if there is someone out there who still thinks it is so and is therefore willing to
I travel to our farm several times a year, and while I am there, I cannot operate. I guess I could take one of the rigs I have here, but I am reluctant to leave a rig in the house because it has been
Gentlemen, Thanks so much for all those ideas. I would love the Eagle I am sure. On the other end of the spectrum, the Century 21 is a good one. In the middle, the K2 would be nice. I will be ponderi
I had remote capability until I sold my OMNI VI+, but I do not have an internet connection at the farm. Good idea, but not an option for the farm. Thanks. -- Original Message -- From: "WA0BAG" <bagma
This will be shocker, but the Yaesu 857D, has been an easy rig to carry around from place to place - I've run it from car batteries and also power supplies. It covers from 160 to VHF, is so small, up
Analog or Digital. Contact off-line. Joe _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec