<< I hear rumour that upgrade kits to the KT36 are available now? Can you tell me if the new antenna has been computer optimized to improve perfoormance significantly over the KT34XA? 73, Ty K3MM Yes
Anyone heard anything about the ugrade kit for the KT34xa? Tribander of -- FAQ on WWW: http://www.contesting.com/FAQ/towertalk Submissions: towertalk@contesting.com Administrative requests: towertalk
PUt it all together at the base of the tower first to make sure it all fits together smoothly. Then tear it down to 2 frame sub assemblies...one with 2 side loosely bolted together and the third side
Just an idea...worth what you pay for it! How about tapping it out to the next screw size and using a machined SS screw. If you cant find one with a small enough head, you can always grind off the ed
I'm sure it'll work great! The T10 drop cable Series 11 I believe refers to a similarity to RG11 which should be good for at least a couple KW at 10 meters. The other stuff ...That sounds like a 1.16
A T2X should be fine and more than adequate. I've had one on a KT34XA plus 402CD for 3 or 4 years now with no problems at all...other than the usual problem with a sticky brake everyonce in a while.
I thought they were auditioning the Pro 57 not 67... Also, the KLM KT34Xa was the only other 32' boom range antenna. The Skyhawk is 24' if I remember correctly, along with the X9, and the Mosley Pro
This is a multi-part message in MIME format. --=_NextPart_000_007B_01BE8ECE.B01DC220 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable You should try 3/8"! I
You ARE going to Dayton arent you?? I've bought a couple there for about 15 bucks each and bought acouple at another local hamfest that were obviously new govt surplus for 20 each. 73, ty K3MM -- FAQ
Ahh, so now it comes out you are using a solid steel rod as a substitute for stranded EHS galvanized guy wire. More smoke and mirrors. What kind of steel?? Where are the insulators and other hardware
I dont think so. This site has almost no catalog information and has just a couple of pictures from their old catalog. At least it's not an official site for ICE. ICE claims to have a domain name: ww
I spoke with ICE today and they claim to have someone working on a web site for them, but they were unaware that their advertised www.iceltd.com was unavailable. As yet there is no official site. He
Is there a single web source for the information on these top band RX antennas? If not, what're the best few? 73, Ty K3MM --Original Message-- From: L. B. Cebik <cebik@utkux.utcc.utk.edu> To: QRP-L L
Yeah, but usually any ground coupling will cause the resonant frequency to be lower, not higher. Something is wrong with Chad's antenna on 15. 73 es GL Chad, Ty K3MM --Original Message-- From: Jeff S
I did the QHS ++ mods to my 402CD and am running without any truss on my 402CD. Havent seen any huge winds, but lots of big ones. 73, Ty K3MM --Original Message-- From: Jim White, K4OJ <k4oj@ij.net>
One thing you could do is call CC and see if you can get one of their new baluns they are shipping (or going to be shipping) with the new XM240 model. It's got a current balun wound with teflon coax
You see, the problem is that AB105 does not like being west of the Mississippi! Ship it all over here and everything will be just fine! 73, Ty K3MM never on left, on consecutive personal County I of
Yeah, those guns can be very frustrating. Usually retightening fixes things, but perhaps it has another problem. Have you tried just replacing the tip? I gave up on guns several years ago and now use
It's probably fine. I'm using the same on mine as is W3LPL. I forget the exact brand, but I think it's called Jetlube or SS20. 73, Ty K3MM -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html S
You can put SS sheet metal screws through all the joints except those for the cap tubes. I recommend getting new straps from KLM>..the new ones are a bit thicker and bent to leave more room for tight