Hello all, First let me say that this reflector has been a godsend for me! Thanks to all who have contributed over the years. I am planning to install a Tennadyne T-12 log periodic on a tower approxi
I just want to say Thanks to everyone who responded to my questions about the dead ends. Especially W8ZN who sent me an excellent, thorough description of how they work. By Jove, I think I've got it
I also recommend trying www.uship.com. I have used them before with good results. Shippers bid against each other to give you the lowest price, but you're not obligated to accept any of the offers. Y
I need a Rohn AS455G Rotor Plate, BPC45G Concrete Base Plate, 3/4x12PP Pier Pin, and about 250 feet of 1/4" EHS guy wire to finish my tower project. Can anybody help? Thanks in advance! 73, Vince K4J
If there are no drain holes drilled in the traps, that tells me they may have bypassed QC (if that even exists anymore!) If so they may also have been mislabeled or, as someone else mentioned, not pr
Do the sections have to be glued? There's no pressure on them and they usually have a pretty tight friction fit. 73, Vince K4JC _______________________________________________ _______________________
Thanks for the info, Dorn. Guess it shows I'm still learning! 73, Vince K4JC _______________________________________________ _______________________________________________ TowerTalk mailing list Tow
I have also been wondering what's the best type of guy anchor to use in Florida sand, and after considerable research I've come to the conclusion that lots and lots of weight is the answer! I'm goin
The problem with digging holes in sand is that you can't get a nice formed hole. As you dig the soil keeps falling back in, so the hole actually has to be made 2 or 3 times wider than you need in ord
Dick, I want to thank you for this post. I have been trying to find an answer to this question for years, but no one seemed to have a definitive answer. Can you tell me where I can find the article y