while we are on the subject of insurance anyone used the ARRL insurance, thoughts? As I understand it they are very forgiving - if you drop your rotator from 135 feet they will pay for it, if your am
I would be interested in hearing from anyone who has used one of these...it looks like a competitor to the Italian Big Boys...love the worm drive gearing! Looks like someone is homing in on Dave Leas
can you route the cable through a PVC pipe...gray stuff/UV exposure rated? That would be easier to tie down I would think... K4OJ _____________________________________________________________________
Banana if you are going to try to heat the larger diameter I recommend you do this while the joint is under pressure to separate...aluminum is excellent at conduction of heat fast....or cool....that'
make the rotor match the mast - then tighten down the shelf....the mast is where it is going to be no matter what.... loosely install all bolts/nuts first tighten down the two u-bolt/plate clamp atta
of course there is always productivity resources, too! K4OJ someone. vary. he's 2" area, wall ________________________________________________________________________ Where do you get ICE bandpass fi
Please summarize to the list - I have one T2X that has both 15 and 20 meter antennas on it and we share it at the multi-op...the positions are in adjacent rooms so we have been using gab messages bac
Need a source for a connector for a Create RC5B3 rotor - the "keyed" 7 pin connector that connects to the rotator housing... any ideas on where to find one - got one? Thanks in advance. Jim, K4OJ ___
pro: aesthetics and ease of lawn mowing absorption of rf gone astray (I know, its coax) not falling on your face when you have to climb the tower at night because you tripped over the feedlines con:
not unique - I opened one up that was intermittent to find the same...they have a great cast housing but inside it is pretty disappointing! k4oj ______________________________________________________
It is almost impossible at times to get a uniform downhill slope - especially if you are on a really flat lot like here in FL....an alternative is to make the tube crest in the middle - and the ends
I am calling the society for the protection of cruelty to animals you SOB - how could you possibly comprehend the emotional distress that mouse felt...I do not even want to know what you did after su
I think you would be happier with the performance of the KT 73, Jim, K4OJ Hex-Beam M2 ________________________________________________________________________ Where do you get ICE bandpass filters &
the function of rebar in concrete is to increase the overall tensile strength of the pour...due to the fact that expansion and contraction of concrete and steel are almost identical the two can be ma
my personal experience is that if it is above ground at least I can be certain by visual inspection of what the condition of the un-concreted part is...there isn't that nagging doubt that comes from
Mike - you might find that you can do a group buy, with those interested in some forwarding you a check - I recently did that locally for the Florida Contest Group for 2 1/16 " u-bolts fabbed up by a
On a casual DXpedition to C6A some years ago I took a vertical with me...I was just going to take it as it came to me from the factory, in the carton as shipped, but then I decided I had better make
watch for good connections between adjoining sections...ma wish to pop rivet them to ensure you don't have any nasty intermittents on windy days! Jim, K4OJ can and any -- FAQ on WWW: http://www.conte