The correct address for LPT1 is 0378H. LPT2 is 0278H. I would change the .ini file to correspond to this information. Windows and DOS have about 65000+ ports available. Some do not take kindly to be
It works with different resolution under win98,ME, XP...and same resolution on win2k. -- Just for information, I tried that with 2 identical PCI cards. This MB has a built in video adapter, and altho
FYI A few days ago, I put out an inquiry to the group asking about these cards. The general consensus was the Matrox G-450. Several other guys expressed interest also, so thought I would pass this al
Well, of course this is a matter of opinion, but I would want to take friendly exception to Barry on a couple of points. First of all, new technology is not analogous to better. I have a 4 port ISA b
-- Well, this doesn't "fix" the problem on the new box, but have you tried "padding" each micro with the same number of "drops" with, say something like spaces.....? If it always drops the last 4 or
I think Bill has hit it right on the head. If I remember correctly, ARRL rules state that all antennas must be within 500 feet of the shack. But, can you imagine the scores we could generate! 73 Ed
First of all, when Win98 boots, it will cycle the RST line to high, low, high, low Period! If the line then goes high, it is in response to a seperate program being run, not Windows. Although the tim
I have a valid cabrillo file that I uploaded to the arrl. Is there any way I can import that file into writelog? The original log file was somehow corrupted and ultimately lost. Is there any way to r
2 observations. I have yet to find a program on a CD that the Norton Ghost cannot copy, first time, every time. And MS could have saved all that junk above if they merely said:"US Federal law gives y
-- Well, not exactly, the calls were not removed, but do lack their "/" designation. I apologize for this and will use the original master.cal to put the "/" back in. 73 Ed
VinceK6BIR@aol.com wrote: I have seen on previous post where you can change the CommSlot setting in Writelog.ini file, but when I look in my .ini file I do not find CommSlot1=1, ComSlot=2, what I do
Scot spoke of voice keyers. I have never been able to create .wav files to my satisfation, so use the new MFJ machie, which is obviously less than desired. However, did a Win98se update from Microgat
Nope, all of the files are in the same voice. Besides, I remember one of the hottest stations (W7) in some contest some years back who had his xyl record the files. Talk about a pileup! 73 Ed
OK, the above is just to reference the subject. I am extremely weak on WL, which is why I keep a separate mailbox for the tips and advice. And Scott's web page is excellent. But I too wish it could b
If any of you guys haven't received word yet, Microsoft has announced a huge security flaw in XP, which can also affect 98 and ME if you have installed a certain program. Microsoft download page has