I'll second that! I have a Hy-Tower 160' behind the house in the clear....no trees....nothing nearby on 10 acres. I never believed what an improvement getting it in the clear would make. If I were yo
That might not be just a story..... A local friend of mine had a tower re-galvanized and the rivets corroded. In investigating this he discovered that the rivets are aluminum. Not really believing hi
I would be more concerned about keeping everything in alignment as it was reassembled. The factory must be using a jig to hold the parts together as they assemble it. Sounds to me like it would be be
My HT IS resonant at 3800....it squirts more than a non-resonant HT and the transmitter IS comfy....HEH Mine has 90, 70' radials stapled to the surface of the ground. This put the resonance at about
Recently I ordered 200' of BF from Davis RF. It arrived here in the Tulsa area in good condition and promptly. As I recall the shipping was about $50. Not cheap by any means but then again this isn't
Regards Dave Harmon NSRCA 586 K6XYZ[at]sbcglobal[dot]net Sperry, Ok. Maybe a tower from a different manufacturer would be a better deal when the shipping cost is figured in. My US Tower HDX-555 was b
If you buy a US Tower you can pick it up yourself at Lincoln, Ks and rent a trailer from them to haul it home. I don't care for their base design but then I have never heard of any trouble with them
All...a friend of mine has what appears to be about 100' of Federal RG-17. If interested call Mike Loyd at 918-622-5763 daytime only. Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. ______
They Yankee Screwdriver antennas are bulletproof. Take a look.... http://www.yankeeantennas.com/ Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. Wanted to Buy: Hi Quality 200-500W rated Sc
Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. --Original Message-- From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contesting.com] On Behalf Of Wes Attaway (N5WA) Sent:
It cost me $60 for the delivery of ready mixed concrete and the truck drove right up to the hole and poured it in. There is no way I am going to rent a portable mixer for $50. Ever lift ONE bag of mi
John....do you mean MFJ or has Hy-Gain been sold to someone else?? I have had good service from them. Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. I don't know why anyone would have thi
Now ya got me thinking...slowly.... In Calif I had an inverted V for 80mtrs hanging off my tower for 28 years. I never had any trouble other than my dawg chewing coax and rotor cables. I DO rememberi
You can get the correct Never-Seez from DX Engineering Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. --Original Message-- From: towertalk-bounces@contesting.com [mailto:towertalk-bounces
+2 Regards Dave Harmon CCA 97-535 K6XYZ[at]sbcglobal[dot]net Sperry, Ok. Marlon, I totally agree especially to the "Reply To All" being a pain in the butt. I forget half the time and only reply to th
Allan.... If you need a static bleed inductor look at this one. http://www.arraysolutions.com/Products/staticsurgecoils.htm#top%20of%20page Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok.
That's going to be a tall order..... I tried for months to sell my nice tower but I had to GIVE it away when I went on the lam from Calif. Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. I
Not me.....I made one call and got the drawings for the tower and everything I needed to install the thing.....before the purchase. Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. They wou
You can get Penetrox from DX Engineering.... Regards Dave Harmon K6XYZ[at]sbcglobal[dot]net Sperry, Ok. It's hard to find Penetrox where I live. Are Oxguard, and NoAlox equivalent for assembling yagi
Hey Butch.....Norms Rotor service is good. http://www.rotorservice.com/ Regards Dave Harmon CCA 97-535 K6XYZ[at]sbcglobal[dot]net Sperry, Ok. What's the best source for Tail Twister part these days?