Hello, I must have screwed something up towards the end of the Worked All Europe (WAE) contest. The Tx-Qtc sequence is correct all the way up to the last three in my log. Somehow I went from 27/1 to
For the gentleman having interface problems, under the help menu / help topics / select find tab and search for the word ICOM. Select the Rig Interfacing title in the click a topic window. You should
Hello Raymond, I own a Yaesu HT along with my ICOM 775DSP. I bought the ADM software and cable to program my Yaesu HT. It just so happens, that the cable supplied with the ADM software has a interfac
Floyd, Have you tried doing a Save Configuration under the Setup menu after changing the values? If so then you may need to edit the Writelog.ini file by hand. This file can usually be found in your
I have had a difficult time connecting to the WU3V mega cluster for the past few months using Writelog. I do not know if it is Writelog or the mega cluster but something seems to be a miss. Anyone el
Hello Raymond, I could be wrong but it sounds to me like you are trying to key cw on your 746 using the CT-17 on Com1. If so, I do not think that it is possible to key CW through the CT-17. I believe
Along with the WH7K mistake, I found that KC6CSY became Palau with a prefrence of T8. -- WWW: http://www.writelog.com/ Submissions: writelog@contesting.com Administrative requests: writelog-REQUEST@c
Hello Marty, My old friend and the person responsible for recommending Writelog to me. DTR Pin 1 on DB9 connector, Pin 8 on older DB25 serial connector. RTS Pin 7 on DB9 connector, Pin 4 on older DB2
Marty, Sorry, I misunderstood your question because the answer seems so simple. One possible solution is that you can put a mating connector for the end of the existing cable that presently connects
Steve, I have been using the Yaesu ADM cable to control my IC-775DSP without any problems. At Radio Shack I was able to find a neat little Headphone Adapter (274-368c $1.99) that adapts 3.5mm stereo
Hello John, Thank you for sharing the link that shows the views of the multiple bandmap. I have tried this very same thing before but have one problem. I can not select any packet spots from the extr
Hello Writelog Support, I recently recommended that Tom AE9B buy the writelog program. He purchased it and has been happily using it with his 1000mp. One day, while using packet spotting, he selected
Hello Ric, Thanks for the assistance but I tried the IcomForceSplit=1 command in the writelog.ini file without any luck. I still believe that the 775 driver is incorrect for setting the split frequen
I have been having been trying to layout my Writelog windows on the display desktop. I have been having trouble getting Writelog to remember where I placed my Bandmap window. I have tried changing th
I appreciate those who have given me assistance thus far. I would like to state that I am well aware how to save my configuration and log file. I like to place my Bandmap window full screen height wi
Hello Rick, I have found that when using the latest version of Writelog that once I close the Bandmap window I can not get it to come back using the Window Bandmap selection in Writelog. I have to cl
I became aware of a new Writelog feature located in the Port Setup window. In the lower left corner of this window, just above the rotator control on COM port settings, is a check box called All mode
I opened a second bandmap window and through the menu I entered the center frequency that I wanted. I noticed that the packet spots show up in both windows. However, when I double click on the spot i
I think that on occasion, in the heat of battle of the last CQWW phone contest, that I may have double clicked on a packet entry effectively erasing my previous contact before I hit enter to log it.
Hello Eric, I may be all wet here but does not your FT920 have selections for either semi-break-in or full-break-in(QSK) in the CW mode? Both my Kenwood TS-850 and the ICOM 775DSP allow me to select