Howdy Martin Latex paint, No mettle flake, it will flex without cracks.Made for outside. Like John said let it get furry. Daryll kg9nd Hi Martin.. I paint mine with resin. You can add colouring to th
Name hr Daryll kg9nd I am looking for a TX55--72. My QTH Williamsburg In. Ie. east central In. Thanks for your time. Reply kg9nd2001@yahoo.com 765.967.3296 ___________________________________________
Hello to all name hr Daryll kg9nd I have the hy gain hdr300a it has been setting for about one year. The potentiometer will not change readings on the dig box. Has anyone else had this happen the the
Thanks to all that replied.. Good info from all of you, some of the info I did not think about and I know it will make the job easier Daryll kg9nd. Daryll, Make sure to check the output of the regula
I will be installing a HG 70 HD this summer and I am looking for anchor bolts. I am having some trouble finding them. Is there a good place to buy three to five of these 27" to 36" 1 1/8" I will need
Howdy I like this group! Good stuff all around. Hr is what I plan to do with my install. As the feed line will be direct bury, not submersible! I plan to use the plastic pipe that is used for leach b
My cus has one he used on a septic repair, runs it in feald tile ect 250' long. I am sure there is a pumper close to u. Buster kg9nd The only problem with those bore scopes is that they only reach
This is the brand name of what I have on my hg-70 hd. For vertical lift. I think I will use a manual hoist when I install a lifting fixture. Make sure u read about the difference between a hoist and
Tony I have had a iteration via rf with some of my equip. in the past and one sure way I found was to change frequ. on my transmitter, may need to change little or allot. That might explain why the s
I used zink-it it is a cold galvanizing spray can. Clean with brake cleaner and apply. I found it at Kirby Risk I think $7.00 a can. One can will do allot. Buster kg9nd __________________________
I did not worry about it. I inspect the tower about once a week or so, give it a good look over and every so often I check bolts, cables, ect. Jest as I would a new one. Buster kg9nd _______________
Hr is one of many ways to get the inside wall covered. Would need allot of cleaning but may be worth it. http://www.zrcworldwide.com/p_zrc.asp A guy may be able to swab with string or rod? or use fu
I use the SA9000AC, without clutch on my hg 70 hd Buster kg9nd ________________________________ From: Richard Zalewski <dick.w7zr@gmail.com> To: Tony <dxdx@optonline.net> Cc: towertalk@contesting.co
When I made for my HG HD70 I found the crimper on line and used the specks for a us tower 70' I jest matched up the length with the old ones and got the size/strand cable us tower uses for the 70'er
Ya that is the same thing I ran into. I opted to use the t plate so I can re plum if needed. I made my own t plate. ________________________________ From: Greg <ab7r@cablespeed.com> To: Marv Shelton
Make Inc0me 0nline with rev0luti0nary system http://72.167.116.186/http102dx-1.php?serolink=219 Thu, 31 May 2012 1:13:17 ____________ Grangerford was very tall and very slim, and had adarkish-paly co
sorry looks like i have been hacked ________________________________ From: Daryll Webb <kg9nd2001@yahoo.com> To: lilahwebb@yahoo.com; kd6pgi@gmail.com; towertalk@contesting.com; don.porter@live.com;