I think a little more info is needed. Are you using Flashrom Modules or AP-1000's? What version of our software are you running? What are your signal to noise ratio's? Are the AP's or the CPE's locki
All, Keep these messages coming....I send them into engineering! If there is an issue, I appreciate your reporting it to me! Kevin ____________________________________ Kevin R. Knuth Business Develop
All, Here is the ANSWER! (I would have responded sooner, but I am on vacation this week!) Our configurator reports information it gets from the radio. Agere radios (I am not sure that this happens wi
Bob, How long the unit has been up is not as important as how many total packets it has passed. If FCS errors are MORE THAN 10% of total packets, you have a problem. Primary cause is usually poor RF.
Bob, If you are concerned about the FCS errors, I suggest you call support. I do notice though, that this customer has received 1.9 BILLION bytes. That is a bunch! And only 3 million FCS errors. I wo
Bob, Since your firewall is NOT registering that much data, I am wondering if he is gaming with another wireless customer? I think you should call tech support and see if they can find out WHY there
Donald, I think the issue is that the card manufacturer has to share their firmware with us for us to write the driver. Agere was willing to do that. Other manufacturers guard that info, and are RARE
All, That is really up to Intersil sharing their firmware with us. Intersil seems willing to work with us....but then again who knows if they will give us what we need. Kevin How long before we see s
I would hold NO hope that Cisco will be willing to share their firmware so we can put TC on it Kevin ____________________________________ Kevin R. Knuth Business Development Manager North America Cor
All, Expect some new product announcements from Karlnet at Wispcon. As to the previous post about the Atheros radio that supports 2.4 and all 5Ghz frequencies. Karlnet adding support can only happen
John, Karlnet TurboCell does not work on this unit. It is based on a different processor and utilizes software that is VXWorks based. I have heard though, that there is a piece of hardware soon to be
Norm, We start getting into some pretty deep thinking at this point! Here is another way of looking at it: Assume you have 39 customers and they all are allowed 128Mbps. I agree that VERY few of them
Jim, David, YES...Version 4.02 supports classless routing. David.....I think you are right...start at the outside of your network and work back.....not 100% sure of that...but it sure sounds right to
GREAT FEEDBACK! Anyone else have some background for me? Kevin Interesting point, Kevin. I suppose all of us are perhaps victims of overly optimistic thinking. But that said, here's my situation: ver
Nate, The temp sensor is a chip on the Flashrom. The AP-1000 does not have this chip. We do have a reference design (a board that includes to PCMCIA/Cardbus slots, industrial chipset (for temp extrem
Norm, If you get NO other responses, let me know. We can find someone with extra licenses by searching the License-it database! Kevin ** Kevin R. Knuth Business Development Manager North American Reg
I can chime in here with 99% accuracy! This is a FIRMWARE issue, not a TurboCell issue. The card manufacturer needs to make changes to their firmware for this type of information to be available. Kev
Nate, All, The current key is for 64 users TOTAL PER BOX! Not per interface. I have heard we are working on keys that would allow more users. I do not have an ETA on when that might be done. Kevin **
Larry, We are working to get the unit to support MORE users. This is an issue of programming and my understanding is we have to "move" some things around to make room in the tables for more users. A
NO..... The max user is still PER piece of software! Thanks for the update on additional users. This means per radio with multiple radios in a FlashROM unit? Larry, We are working to get the unit to