Patrick I agree with you. I've had one up for 12 years and the set up is similar to you idea, its an Aluma with the "Ground Post". I have had a C31XR on it a 4el Steppir and now a Tennadyne T-8. All
Jim Jim I'm wondering which Aluma tower you have? I have a 75 ft. HD and there isn't a pull down cable on it there are 2 more cables that are called "scissor cables" these equalize the middle and top
Dan They are shown in my schematic as 1N5401 3amp 100v 73 Larry K1ZW -- Message: 4 Date: Mon, 23 Sep 2013 11:43:18 -0700 From: "Richard (Rick) Karlquist" <richard@karlquist.com> To: Dan Evans <k9zf@y
I have to agree with Steve my T-8 is great across the bands I started with a C31XR and it was good on 20 and 10 but terrible on 15 very limited bandwidth. I replaced it with a 4L Steppir with the 40m
I have the turkey buzzard problem except mine like the ride, never move when the antenna is moving( they don't have to turn there heads for a 360 view). The leaves are off the tall oak close to the t
To All I built my own tilt plate back when Al was designing his, and it been in use since 2004. Very simple and in expensive(about $100 in 2004) Pictures of it are on the Yahoo group "Crankup Tiltove
I've been using the D L SA9015ac for several years on my Aluma 75HHD the thing to be cautious about is to order the winch without the clutch so it's power in power out and no freewheeling. They will
John you might want to take a look at Aluma Towers. I have a 75ft hhd crank up tilt over tower. They have quite a selection of towers and they like doing business with hams. 73, Larry K1ZW Message: 4
Joe Cant go with the 2800 Ive had mine up since 2001, I did add a Green Heron controller more for the tower than rotor. Take a look at the Yaesu website and see what your K factor is 73 Larry K1ZW. Y
I don't know why but my reply to 2800 should have read "can't go wrong with the 2800......" 73 Larry K1ZW Today's Topics: 1. Re: Yaesu 2800 Rotor (Pete Smith N4ZR) 2. Yaesu 2800DXA (Larry Stowell) 3.
Fred I have looked at the MFJ window panels and can't figure out how you seal the gap between the 2 sashes on a double hung window, as soon as you raise the lower sash you loose the seal. I called MF
Today's Topics: 1. Utility Pole as Beam Support (Clay Jackson) 2. Re: Utility Pole as Beam Support (Jon Pearl - W4ABC) 3. Re: Utility Pole as Beam Support (n0tt1@juno.com) 4. Re: Utility Pole as Beam
Bill. I had one of the first four element steppir and they originally used a section of PVC pipe with two and caps and a slot in the bottom part of the two. The original stepper motors had pigtails a
I have 2 of these and they work great. http://www.bernzomatic.com/item.html?id=46 I keep one with my heat shrink and the other for soldering 73 Larry K1ZW ____________________________________________
A little high on price $788.00 T-8 I have one and love it. 73 Larry K1ZW Message: 7 Date: Fri, 21 Nov 2014 11:29:45 -0700 From: "Paul Veal M.Ed N0AH" <bryonveal@msn.com> To: <jim@audiosystemsgroup.co
I couldn't agree more that last 20 30° is very uncomfortable. What I did is got two sections of used 25G mounted it with a homemade mount on the same block of concrete that the universal was on back
Peter I use Chris's (http://kf7p.com/KF7P/Welcome.html), the upper arm has a nice curve to it. 73 Larry K1ZW Hello all, I?m using an old LM-470 crankup tower and have a question about best practices
I'm looking for the connector at the rotor for a Yaesu 2800. I just did a search on the archives and found the reference to the Molex on the control box but I don't need that one. Yaesu wants $50 for