I purchased a copy of WL only to find out that it does *not* support LPT1 for direct CW keying when you're running XP. (I have no interest in keying CW via the PTT line; I want to be able to hear the
Many thanks to all of you who replied to my earlier inquiry. You've been very helpful. What a terrific group! Hope to work y'all soon. 73, Rick, N1RL _______________________________________________ W
Well, I'm stumped again. Even after reviewing (and reviewing) the fine tutorials by Don, AA5AU, I still cannot get the MMTTY module to transmit FSK RTTY with WriteLog. MMTTY works fine as a standalon
Hi, Gary I was able to get LPT1 to key the radio by entering the appropriate rerouted COM designations in the Writelog.ini file and using DirectIO. I haven't tried one of the free options to DirectIO
Hi, Joe I was beginning to wonder if this wasn't the case, although several folks have told me this should work. I guess I've just wasted $30 unless I want to run RTTY with the clunky RittyRite engin
Hi, Joe & Don Thanks again. Yes, I'm aware that the MMTTY engine does not use EXTFSK, and the rest of what you say makes sense. The USB - >serial adapter I'm using (which has a Prolific driver; the h
Hi, Scott With a "real" RS-232 serial port (as opposed to a USB port with a USB to RS-232 adapter), you should have no problem running WriteLog with MMTTY for FSK with your RIGblaster Plus. You need
I'll give it a try, but I did just order the Belkin USB - > Serial adapter that a lot of folks say will do the 5 bit codes. Thanks! 73, Rick Rick, Don is correct. It appears that the "Software genera
Greetings! Success at last! Hallelujah! One other thing I needed to do was make some changes to the jumpers on my RIGblaster Plus. The jumper pattern I wound up with is NOT one that West Mountain Rad
Very interesting, Joe. Y'know, it does get a bit confusing figuring out which program is doing what. The curious thing with the TX and RX buttons on MMTTY is that you can still kill the transmission
Dude, we're HERE for you! 73, Rick, N1RL sorry just testing , subbed a few days ago and have not seen any posts on the reflector yet scott w4so **It's Tax Time! Get tips, forms, and advice on AOL Mon
Greetings! I just got a new laptop for the shack since my venerable HP's hard drive has begun to crash. Of course, the new unit is running Vista. When I attempted to download WriteLog, it said I need
Here ya go, dude: http://www.qsl.net/sterling/VA_QSO_Party/2008_VQP_Counties&Cities_Integrated _List.html 73, Rick (ex-KX4V, N4APK in Pulaski and Montgomery counties) Anyone know of a source of eithe
Second call. When I attempted to download WL on my new laptop running Vista, I got a message that said I needed to load Microsoft Installer (MSI), but that's not even intended for use with Vista. But
I?m running into a blank wall here vis-à-vis trying to locate the ?real? WriteLog config file (writelog.ini), which I know is not the one in the Windows directory (although there is one there, it?s n
Okay, I got the COM port part figured out. WriteLog didn't like that I was using COM 3 for EXTFSK in MMTTY, so I removed the conflict, and it sends CW now. Still don't know where my .ini file is, how
It is the one in the Windows directory unless you're running Vista. Then all bets are off. That was the "real" .ini file in my old laptop, which ran XP. Thanks! 73, Rick I'm running into a blank wall
Many thanks for the prompt responses to my query. I believe I've got it all figured out now. You guys are terrific! Someone asked if I had to swap out cables for each mode or have them set up with a
I'm having a problem trying to get WriteLog working in concert with my RIGblaster Plus interface for CW mode. The program will generate CW, since I can hear the CW hard keying the FSK in my PROIII if