Hi all, For years used windows 98se with no problems. Got the XP windows home & SP2, transferred all the files via CD, reboot and unzipped WL1052D Full. When I enter the latest registration the syste
Hi George K5KG & John AD8J, Tnx to both of you for trying to help me. George, in my old computer I was using 1057H and had no problem operating, but after transferring all the files to Windows XP tha
Jim, All I did was copy all my files via CD from windows 98se to windows XP Home Edition. I'm using the same registration for ver.1056 & ver.1057H. It was working on the old machine and should have w
Thank you all who responded to help me, all of you had valid ideas and probably would have solved my problems. Contacted Ron K5DJ explained the problems I was having, also, sent him the registration
WriteLoggers, I have the full Ver.1058E installed and working properly. Downloaded Ver.1059upg, trying to install and window opens saying, "WL was installed using MSI. You must download and install t
Hi to the group, I salvaged a ByteRunner PCI 200 two serial port from an old computer, Isntalled it to a Dell Optiplex GX270. Where can I obtain, find a driver for it? 73, Noel (OM) N3NZ ____________
Thank you all for the information, great bunch a guys . I was trying the wrong site, the one with /windows_2000.html did it. Found out that the card was a PCI 200L. Best regards to all 73, Noel _____
I have the latest WriteLog V10.70. Can't add anything except my call sign and section to Cabrillo. Edited the header information and uploaded the log (arrl dx cw) three times. Every time it was rejec
I just compared my Cabrillo header with the one that Bruce Meier N1LN sent me. It looks like I added an extra space, describing the details in the header. I re-submitted my log, will see the results
I want to thank you all who responded to help with my problem, in particular Bruce N1LN, Jim W3CP and Dick W0RAA who sent me the samples for the Cabrillo headers format. The ROBOT finally accepted th
Hi all, I just acquired a Yaesu FT-897 and having a problem to connect it to the Ameritron AL-811H Amplifier. Amplifier is working OK with both Kenwood radios. Got an audio cable from R/S 1/8 stereo
Hi all, I contacted Yaesus Tech help center for the problem am Having, they told me:I cant use the CAT interface and an Ameritron Amplifier at the same time. To use the Ameritron I have to disconnect
One and All, Thank you very much for inputting your suggestions to help me. I decided to purchase the CAT-MATE "Y" Splitter from W4RT. 73, Noel (OM) N3NZ _____________________________________________
Hi, Just wanted to inform all who responded to help me, that Erwin DK5EW, uploaded a modification file to the FT-897 group concerning amplifiers in general, and that solved my problem. I am glad I de
WriteLoggers, Every time I start the computer, I have to go to control panel-Sounds Audio Devices and put a check mark in the Place volume icon in the task bar. I don't remember doing anything to cau
Can some one direct me to the SCC module? Noel N3NZ _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog
Hi all, Trying to participate in Marac County Hunters for the first time. I can not find my county in the drop down list, Delaware in PA. Would appreciate your help. 73, Noel (OM) N3NZ ______________
Thank you Don AA5AU, for posting the How to remove Data Restore virus on the reflector. For the past few RTTY contests I was not able to compete at all. The micro keyer and a host of programs and fil
This morning wanted to give some points in RTTY RU. Every time I start the latest WriteLog program it shuts down with a note, Can't create rtty OLE Automation Object. I prepared the program few days
Don, All is well now, downloaded version 11.01F and no problems what so ever, go figure. Hope to work you next RTTY contest. 73, Noel (OM) N3NZ _______________________________________________ WriteLo