- 1. [RFI] TVI (score: 1)
- Author: "Rick D" <n6pe@pacbell.net>
- Date: Fri, 22 Jun 2007 10:48:41 -0700
- My Alpha 78 TVI goes away if I remove the S-video cable between the DirecTV receiver and TV. With it in the line 5 watts on 160 meters gives me TVI. I don't know if it is a bad cable or ??? but I don
- /archives//html/RFI/2007-06/msg00030.html (11,299 bytes)
- 2. [RFI] Smoke and CO alarms (score: 1)
- Author: "Rick D" <n6pe@pacbell.net>
- Date: Sat, 29 Sep 2007 08:27:03 -0700
- Chasing VK9WWI this morning I fired up the Alpha 78 on 80 meters. Woke the dogs and XYL setting off my First Alert BATTERY operated smoke and CO alarms. Any known cure short of QRP or QRT ? Thanks, R
- /archives//html/RFI/2007-09/msg00032.html (6,995 bytes)
- 3. [RFI] Alarms (score: 1)
- Author: "Rick D" <n6pe@pacbell.net>
- Date: Sun, 2 Sep 2007 18:11:16 -0700
- Thanks to all for the replies on the smoke and CO detectors. Apparently there is no common cure for wireless units other than separation and RF reduction. It is hard to know if popping in a bypass ca
- /archives//html/RFI/2007-10/msg00015.html (6,531 bytes)
- 4. [RFI] Smoke and CO alarms update (score: 1)
- Author: "Rick D" <n6pe@pacbell.net>
- Date: Mon, 8 Oct 2007 10:00:38 -0700
- Turns out my CO detector is a Kidde. I took it apart and could see a 10ufd electrolytic across the battery terminals. Put a 0.047 disk across it and no beeping on 160 or 80......... yeah But wait, fi
- /archives//html/RFI/2007-10/msg00022.html (10,054 bytes)
- 5. [RFI] Smoke CO update (score: 1)
- Author: "Rick D" <n6pe@pacbell.net>
- Date: Tue, 16 Oct 2007 19:18:56 -0700
- I bought a new Kiddie Smoke/CO detector and a plain Smoke detector. Put 0.02 ufds across the battery connections on the boards. Same locations as old detectors. No false triggering with maximum out o
- /archives//html/RFI/2007-10/msg00056.html (6,796 bytes)
- 6. [RFI] Foam (score: 1)
- Author: Rick D <n6pe@pacbell.net>
- Date: Mon, 29 Oct 2007 18:21:28 -0700
- Anyone know the electrical/RF characteristics of the various expanding foam products? I am building some traps for my 160/80/40 L and was considering filling them with foam. Traps are made from old R
- /archives//html/RFI/2007-10/msg00132.html (6,547 bytes)
- 7. Re: [RFI] Testing & Comparing Compact Fluorescents? (score: 1)
- Author: Rick D <n6pe@pacbell.net>
- Date: Wed, 31 Oct 2007 08:36:41 -0700
- I have four Phillips 100 W CFLs in a ceiling fan in the shack. No detectable noise on any band over the outside antenna with either pair or all four on. You can hear them on an AM radio placed next t
- /archives//html/RFI/2007-10/msg00146.html (7,971 bytes)
- 8. Re: [RFI] [RTTY] Topband: Foam (score: 1)
- Author: Rick D <n6pe@pacbell.net>
- Date: Mon, 05 Nov 2007 16:40:36 -0800
- Thanks for all the suggestions on foaming the traps. Not too much out there on the various easy to find stuff, might make a good article for QST. I'm sticking with air in the traps. TNX AGN and 73, -
- /archives//html/RFI/2007-11/msg00007.html (6,651 bytes)
This search system is powered by
Namazu