- 1. [NA-User] NA/990 Interface (score: 1)
- Author: nx5m@txcyber.com (Bob Pack NX5M)
- Date: Fri, 4 Oct 2002 20:39:26 -0500
- Is there any special stuff needed to interface a Yaesu FT-990 with NA or = can the serial cable just be connected directly to the radio? I know = about the 1000 but I have had mixed opinions on the 9
- /archives//html/NA-User/2002-10/msg00001.html (6,652 bytes)
- 2. Re: [NA-User] Using NA with Web Spots (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Mon, 17 Nov 2003 16:25:55 -0600
- I am using DxTelnet for the internet packet. I have a dedicated internet machine along with 5 computers in a network used only for running NA. You can use a null modem cable from a com port on the in
- /archives//html/NA-User/2003-11/msg00016.html (8,270 bytes)
- 3. Re: [NA-User] Using NA with Web Spots (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Mon, 17 Nov 2003 23:08:14 -0600
- I think they both probably work equally as well (WinTelnetX and DXTelnet). And yes, the TTT stuff is free. That is certainly a bonus and I would not fault anyone for going that route. As for my use o
- /archives//html/NA-User/2003-11/msg00020.html (9,728 bytes)
- 4. [NA-User] 10.59 Announce/Band-Map Problem in 10m Contest (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Tue, 9 Dec 2003 22:09:11 -0600
- I was setting things up for the 10m contest tonight and found a problem that I cannot seem to solve. I am bringing packet spots in via the internet machine. And I might add that it is nice to not see
- /archives//html/NA-User/2003-12/msg00004.html (7,146 bytes)
- 5. [NA-User] Gab Message Display Time (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Wed, 24 Mar 2004 19:48:43 -0600
- Is there a way to increase the amount of time a GAB message will stay up or just have it stay there until another message kicks it off? 73, Bob NX5M _______________________________________________ NA
- /archives//html/NA-User/2004-03/msg00008.html (6,405 bytes)
- 6. [NA-User] Paddle Port Problems (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Sat, 1 May 2004 19:18:21 -0500
- This is happening on both 10.58 as well as 10.59. New computer has been added to the station. Setting up for WPX CW I have discovered that when the paddle port is enabled (LPT1) all I can get is a co
- /archives//html/NA-User/2004-05/msg00000.html (6,462 bytes)
- 7. Re: [NA-User] Using NA for IARU M/S this weekend (score: 1)
- Author: "Bob Pack, NX5M" <nx5m@txcyber.com>
- Date: Mon, 5 Jul 2004 15:03:21 -0500
- On radio 2 I think all you can do now is SEARCH but not pounce if I read the rules correctly. It has been a few years since I did a multi in IARU and it seems the rules have changed a bit. To me, the
- /archives//html/NA-User/2004-07/msg00006.html (11,160 bytes)
- 8. Re: [NA-User] Using NA for IARU M/S this weekend (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Mon, 5 Jul 2004 20:17:19 -0500
- The 10-minute rule is still in effect according to the 2004 rules and this applies to band and mode. A mode change is the same thing as a band change. I checked on this with N1ND and he confirmed it.
- /archives//html/NA-User/2004-07/msg00008.html (10,890 bytes)
- 9. [NA-User] NA 10.60 (score: 1)
- Author: "Bob Pack, NX5M" <nx5m@txcyber.com>
- Date: Mon, 1 Nov 2004 11:43:03 -0600
- Dave, With all the problems last year using 10.59 in the 10m contest (multi-op mixed) you had mentioned that you had found the problem and would possibly release a new version (10.60) that would fix
- /archives//html/NA-User/2004-11/msg00002.html (6,800 bytes)
- 10. [NA-User] 10.60 Release? 10m Contest Fix? (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Thu, 11 Nov 2004 22:12:19 -0600
- Since I have not heard back on this I will post it again? -- With all the problems last year using 10.59 in the 10m contest (multi-op mixed) you had mentioned that you had found the problem and would
- /archives//html/NA-User/2004-11/msg00017.html (6,937 bytes)
- 11. Re: [NA-User] 4 serial port card (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Sun, 12 Dec 2004 14:32:37 -0600
- If you have two you could just add another dual port card. That is what I did with all my stuff. 73, Bob NX5M -- Original Message -- From: "Bill Feissner" <ai3q@arrl.net> To: <na-user@contesting.com>
- /archives//html/NA-User/2004-12/msg00005.html (7,608 bytes)
- 12. Re: [NA-User] 4 serial port card (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Sun, 12 Dec 2004 21:23:40 -0600
- I have attached the link for where I bought my dual-port cards. They are for ISA slots. Each port can be configured with its own IRQ. They may have them for a PCI slot as well. http://www.buy.com/ret
- /archives//html/NA-User/2004-12/msg00007.html (12,050 bytes)
- 13. Re: [NA-User] All Asian DX Contest (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Mon, 30 May 2005 20:55:17 -0500
- Unless Dave has one on his computer there is not one available....that I can find. However, I think it would be possible to create the proper template. I may take a look at the specifics of the conte
- /archives//html/NA-User/2005-05/msg00012.html (7,798 bytes)
- 14. Re: [NA-User] All Asian DX Contest (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Mon, 30 May 2005 22:23:35 -0500
- Well, I just discovered that it can be done with one small hitch. Point values cannot be set to that of the contest rules (160=3, 80=2, 20/15=1, 10=2). That is something that brother Dave would have
- /archives//html/NA-User/2005-05/msg00014.html (11,243 bytes)
- 15. Re: [NA-User] All Asian DX Contest (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Tue, 31 May 2005 23:07:45 -0500
- I just skimmed the rules last night. I could look into it in more detail Thursday night. The qso point value is probably the main issue. The other is a YL op having the option to send her age or 00 i
- /archives//html/NA-User/2005-06/msg00000.html (7,826 bytes)
- 16. Re: [NA-User] All Asian DX Contest (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Fri, 3 Jun 2005 22:12:42 -0500
- I did not research it much the other night but now I am looking over it more closely. Not that I am all that interested in having anything done with NA for this particular contest........but in case
- /archives//html/NA-User/2005-06/msg00002.html (9,928 bytes)
- 17. Re: [NA-User] Adding a catagory (score: 1)
- Author: "Bob Pack, NX5M" <nx5m@txcyber.com>
- Date: Tue, 21 Jun 2005 11:01:08 -0500 (CDT)
- If memory serves me correctly you will need version 10.59 (or 10.58, I just cannot remember right now). Bob NX5M -- Original message follows -- Am going to use an older computer for feild day and it
- /archives//html/NA-User/2005-06/msg00015.html (7,159 bytes)
- 18. Re: [NA-User] Adding a catagory (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Tue, 21 Jun 2005 22:12:28 -0500
- Adding WCF to the sections file is easy. Simply open up sections.mlt with a text editor and add it. You just need to be careful to keep things in the proper format. Being able to add F (was this it?)
- /archives//html/NA-User/2005-06/msg00023.html (8,203 bytes)
- 19. Re: [NA-User] NA 10.59 Alt - V CW Speed (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Sun, 26 Jun 2005 09:10:01 -0500
- Try setting a speed normally with the ALT-F9 (or ALT-F10) keys. Then press ALT-V. I think you will see a change of 4wpm. For more of a change you can set a different variation of speeds by setting a
- /archives//html/NA-User/2005-06/msg00025.html (7,870 bytes)
- 20. [NA-User] IARU Mults (HQ's) (score: 1)
- Author: "Robert Pack (NX5M)" <nx5m@txcyber.com>
- Date: Wed, 29 Jun 2005 21:59:33 -0500
- Is there are way to have the HQ station mults put into the mult list file before the contest? I was just thinking that if there was a list of HQ mults already in the mult file I could avoid having so
- /archives//html/NA-User/2005-06/msg00027.html (6,555 bytes)
This search system is powered by
Namazu