Rroger (K8RI on TowerTalk) schreef: Roger There was no way to to get the bearings of the as. We have used pulley's, heating, but is was so heavy rotten together there there was no other solution to t
Richard Zalewski schreef: Hi Not a old tower base, but an old bunker as base and a 15 meter feestanding tower. http://www.pi4cc.nl/tech-info/anker/ Peter PC2A ________________________________________
Just for the info: http://www.wirelessestimator.com/breaking_news.cfm#Don_Rohn Peter PC2A www.pi4cc.nl _______________________________________________ _______________________________________________
Geoffrey Way schreef: Its better to ask here http://groups.yahoo.com/group/Easy_Rotor_Control We have 3 of them working but not with a hamIV. Just check the relay who have to activate the brake The N
Jay Within Win-test (.com) there is a stand alone program called wtRotators.exe Here you can define groups of stacks and different rotators. Documentation http://docs.win-test.com/wiki/Rotators The f
Kevin, We, PI4CC, build a cage dipole with 4 wires This one gives a swr better than 1:2 over our part (3,5-3,8Mc) Some pictures an info at https://www.pi4cc.nl/tech-info/antenna/80/ Peter PC2A Op 1-3
Keith, Did you look at https://www.alibaba.com/product-detail/1-2-Cable-DIN-7-16_60222039246.html ? We at PI4CC used them. A video where I repace a bad connector up the tower is at https://www.pi4cc.
Hi Keith A few more video's of this type connector and sealing: https://www.youtube.com/watch?v=9cDrDOmPRhc https://youtu.be/DK3wfQ6SzqM They are made for 1/4 to 1-5/8" type 7/16 and also N Peter ht
Byron In EU they are around 23 euro. http://awbroadcast.com/nl/product/spinner-7-16-male-connector-voor-rg-214-u/ http://nl.rs-online.com/web/p/7-16-connectors/4889346/ Peter https://www.pi4cc.nl Op
Tom, Are you looking foor those? Differend sizes: 10cm and 2 mm wire 10cm and 3 mm wire 12cm and 3 mm wire 12cm and 4 mm wire There are 0.20 euro in Holland. I can send them if needed. Peter htt
Rich, Have look at https://www.pi4cc.nl/album/rotor%2040M/slides/07.html for some ideas. Here is a rotor bearing that carried all the load for a 2 el full size 40 meter beam Have also a look at the r
All " The chokes at the combiner prevent all the feedlines together them from acting like a ground screen. Without the chokes, they are all RF bonded together. John W1FV explained this in his origina
Hi group If Steve will give permission, I can order a batch for the new pcb and send them from here WW. The main PCB will send with 10 RX-amps PCB's You may select the original by W1FV , the VE6WZ v