- 1. [TowerTalk] Ginpole for 20 foot sections (score: 1)
- Author: plplants@sgi.net (Paul Plants)
- Date: Mon, 11 Jun 2001 17:30:35 -0400
- 20 section We have a ginpole that is about 30 feet long and is about 4" in diameter. We lift into place with a Rohn 25 ginpole. Seems funny using a ginpole to lift a ginpole in to place. We raised a
- /archives//html/Towertalk/2001-06/msg00231.html (9,916 bytes)
- 2. [TowerTalk] Questions on my tower (score: 1)
- Author: plplants@sgi.net (Paul Plants)
- Date: Wed, 16 May 2001 17:54:36 -0400
- Gust remember even though you live in a 70 MPH rated area as I do, you will get winds over that. Last December we had winds to 87 MPH for an 8 hour period. Overrate your equipment for safety! Paul N3
- /archives//html/Towertalk/2001-05/msg00365.html (11,683 bytes)
- 3. [TowerTalk] Questions on my tower (score: 1)
- Author: plplants@sgi.net (Paul Plants)
- Date: Wed, 16 May 2001 19:31:21 -0400
- Mine was is a Rohn HBX56 self-supporting with a 440 repeater antenna on it. It swayed a good bit but no damage. Paul N3WMV been last List Sponsor: Champion Radio Products - We'll be at the Dayton Ham
- /archives//html/Towertalk/2001-05/msg00368.html (10,032 bytes)
- 4. [TowerTalk] Rohn HDBX-48 anchor bolts (score: 1)
- Author: plplants@sgi.net (Paul Plants)
- Date: Wed, 22 Sep 1999 19:57:02 -0400
- I used 1" X 36" galvanized steel allthread on my HBX56. Picked them up at Fastenal about $25 for 3 with double nuts and washers. __ Paul L. Plants Callsign 680 1/2 Broad Street N3WMV Washington, PA 1
- /archives//html/Towertalk/1999-09/msg00527.html (9,284 bytes)
- 5. [TowerTalk] Tubes Separated! (score: 1)
- Author: plplants@sgi.net (Paul Plants)
- Date: Tue, 8 Dec 1998 12:18:11 -0500
- No problem use distinctive ring and a device to switch to the correct controller. __ --Original Message-- From: Terry Sharar <terrys@romulus.ncsc.mil> To: towertalk@contesting.com <towertalk@contesti
- /archives//html/Towertalk/1998-12/msg00107.html (8,851 bytes)
This search system is powered by
Namazu